DCS MO24SS manual Before Operating, To SET the Clock, Stop/Clear, O C E D U R ED I S P L a Y

Before Operating

•Before operating your new microwave oven make sure you read and understand this operation manual completely.

•Before the oven can be used, follow these procedures:

1. Plug in the oven. Close the door. The oven display will show WELCOME PRESS CLEAR AND PRESS CLOCK.

2.Touch the STOP/CLEAR pad.

3.Set clock.

:

will appear.

TO SET THE CLOCK

•Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.).

P R O C E D U R ED I S P L A Y

1	TIMER	ENTER
	CLOCK	2

Touch TIMER/CLOCK pad	TIME OF
	DAY
and number 2 pad.

2	1	2	3	0	12:30
Enter the correct time
of day by touching the
numbers in sequence.
3	TIMER				12:30
	CLOCK
Touch TIMER/CLOCK
pad again.

STOP/CLEAR

Touch the STOP/CLEAR pad to:

1.Erase if you make a mistake during programming.

2.Cancel timer.

3.Stop the oven temporarily during cooking.

4.Return the time of day to the display.

5.Cancel a program during cooking, touch twice.

This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time.

•If the electrical power supply to your microwave oven should be interrupted, the display will inter- mittently show WELCOME PRESS CLEAR AND PRESS CLOCK after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/ CLEAR pad and reset the clock for the correct time of day.

10

2.DCS MO24SS / B268 10 10/31/2001, 4:25 PM