MODE
BAND
cPLAY
r, t
sSTOP
Remote Control (CSD-TD66 only)
Insert two R6 (size AA) batteries.
R6 (AA)
When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries.
PRESETTING STATIONS
You can preset up to 15 stations in each band.
1 Select a station.
2 Press * sSTOP/MEMORY once so that “M” is displayed to store the station.
A station is assigned a preset number, beginning from 1 in consecutive order for each band.
Preset number
The remote control may not operate correctly when:
-The unit is exposed to intense light, such as direct sunlight
-Objects block the remote control signal to the unit
To use the buttons on the remote control
Buttons on the remote control and the main unit with identical indications have the same functions.
To turn the power on
Press POWER to turn on the display.
When using the unit on the batteries, this button will not turn the power on.
To turn the power off
Press POWER to turn off the display.
En
Frequency
* or s on the remote control
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 15 preset stations have already been stored for a band.
To listen to preset stations
Select a band then press e PLAY/PAUSE/PRESET repeatedly.
cPLAY on the remote control is also available (CSD- TD66 only).
To select a preset number directly with the remote control
Press the numbered buttons
To select number 15, press +10 and 5. To select number 10, press +10 and 0.
To clear a preset station
Select the preset number first. Within 4 seconds, keep
spressed until “M” and the preset number disappear in the display.
The higher numbers in the band are decreased by one.
When one of the deck operation buttons is pressed, this button will not turn the power off.
To use the FUNCTION button
Each time FUNCTION is pressed while the power is on, the function is selected cyclically.
CD RADIO * TAPE
*applicable when one of the deck operation buttons is pressed
FUNCTION
POWER