EdgeStar Upright Freezer manual Operation, Temperature Control

Page 2

loaded than when empty.

In order to prevent vibration and noise, the freezer should be leveled by adjusting the front leveling legs.

Please note that this appliance is designed for “free-standing”use only. Choose a well ventilated location with at least 2-3 inches of clearance around the appliance.

Locate the appliance out of direct sunlight and away from heat sources such as an oven or boiler. For your safety, please read the following information

Warning: This appliance must be installed on a circuit that is grounded.

Operation

Before plugging in your freezer for the first time remove all packaging, clean the freezer with a soft rag and a mixture of lukewarm water and baking soda (2 tablespoons baking soda in 1 quart of water works well) . Wipe dry with soft cloth.

Temperature Control

The temperature in the appliance is controlled by the thermostat control knob located in the lower section. Turn the thermostat control knob to regulate the temperature inside the unit. The knob has markings to indicate the relative temperature settings, but in general, turning the knob

2

Image 2
Contents Installation and Operation Dear customerTemperature Control OperationLock DefrostingFreezer is noisy when running Cleaning your freezerTroubleshooting Freezer is not workingFreezer does not cool sufficiently StorageWhat is Covered What is not CoveredDescription of Warranty Service Obtaining Warranty Service