EdgeStar IB120SS owner manual Important Safety Instructions, Installation Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

WARNING

FOLLOW THESE BASIC PRECAUTIONS TO

 

REDUCE THE RISK OF FIRE, ELECTRICAL

 

SHOCK, OR INJURY WHEN USING YOUR ICE

 

MAKER.

•READ ALL INSTRUCTIONS BEFORE USING THE ICE MAKER.

•DANGER: RISK OF CHILD ENTRAPMENT.

CHILD ENTRAPMENT AND SUFFOCATION ARE NOT PROBLEMS OF THE PAST. JUNKED OR ABANDONED APPLIANCES ARE STILL DANGEROUS.

•BEFORE YOU THROW AWAY YOUR ICE MAKER: TAKE OFF THE DOOR.

•NEVER ALLOW CHILDREN TO OPERATE, PLAY WITH, OR CRAWL INSIDE THE APPLIANCE.

•NEVER CLEAN ICE MAKER PARTS WITH FLAMMABLE FLUIDS. THE FUMES CAN CREATE A FIRE HAZARD OR EXPLOSION.

•DO NOT STORE OR USE GASOLINE OR ANY OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THE FUMES CAN CREATE A FIRE HAZARD OR EXPLOSION.

INSTALLATION INSTRUCTIONS

¾BEFORE USING YOUR ICE MAKER

•REMOVE THE EXTERIOR AND INTERIOR PACKING.

•CHECK TO BE SURE YOU HAVE ALL OF THE FOLLOWING PARTS:

•1 ICE BUCKET

•1 PLASTIC SCOOP

•1 HOSE, 25 FT.

•1 INSTRUCTION MANUAL

•BEFORE CONNECTING THE ICE MAKER TO THE POWER SOURCE, LET IT STAND UPRIGHT FOR APPROXIMATELY 2 HOURS. THIS WILL REDUCE THE POSSIBILITY OF A MALFUNCTION IN THE COOLING SYSTEM FROM HANDLING DURING TRANSPORTATION.

•CLEAN THE INTERIOR SURFACE WITH LUKEWARM WATER USING A SOFT CLOTH.

¾INSTALLATION OF YOUR ICE MAKER

•THIS APPLIANCE IS DESIGNED TO VENT HOT AIR THROUGH THE FRONT VENT. THIS ALLOWS FOR INSTALLATION IN A RECESSED OR BUILT-IN APPLICATION, IF DESIRED.

•PLACE YOUR ICE MAKER ON A LEVEL SURFACE THAT IS STRONG ENOUGH TO SUPPORT THE ICE MAKER WHEN IT IS FULLY LOADED. REMEMBER THAT THE UNIT WILL BE SIGNIFICANTLY HEAVIER ONCE IT IS OPERATIONAL AND FULLY LOADED. LEVEL YOUR ICE MAKER BY ADJUSTING THE LEGS AT THE FRONT OF THE ICE MAKER.

•LOCATE THE ICE MAKER AWAY FROM DIRECT SUNLIGHT AND SOURCES OF HEAT (STOVE, HEATER, RADIATOR, ETC.). DIRECT SUNLIGHT MAY AFFECT THE FINISH AND HEAT SOURCES MAY INCREASE ELECTRICAL CONSUMPTION. EXTREME COLD AMBIENT TEMPERATURES MAY ALSO CAUSE THE ICE MAKER MALFUNCTION. THIS ICE MAKER IS DESIGNED FOR INSTALLATION INDOORS IN “ROOM TEMPERATURE” AMBIENT CONDITIONS.

•AVOID LOCATING THE ICE MAKER IN MOIST/HUMID AREAS. TOO MUCH MOISTURE IN THE AIR WILL CAUSE FROST TO FORM QUICKLY ON THE EVAPORATOR REQUIRING FREQUENT DEFROSTING.

•PLUG THE ICE MAKER INTO AN EXCLUSIVE PROPERLY INSTALLED GROUNDED WALL OUTLET. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD. ANY QUESTIONS CONCERNING POWER AND/OR GROUNDING SHOULD BE DIRECTED TOWARD A CERTIFIED ELECTRICIAN.

1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Page ¾ Before Using Your ICE Maker Important Safety InstructionsInstallation Instructions ¾ Installation of Your ICE Maker¾ Extension Cord Review State and Local Plumbing Codes Before Installation¾ Electrical Connection Operating Your ICE Maker Care and Maintenance¾ Cleaning Your ICE Maker ¾ Reversing the Door Swing of Your ICE Maker¾ Energy Saving Tips ¾ Vacation TIME/STORAGE¾ Moving Your ICE Maker Problem Possible Cause Problems with Your ICE MAKER?Troubleshooting Guide Limited Warranty What is Covered

IB120SS specifications

The EdgeStar IB120SS is a standout appliance in the realm of ice makers, designed for those who prioritize convenience and efficiency in their ice production needs. With a sleek stainless steel exterior, it not only serves a functional purpose but also adds a touch of modern sophistication to any kitchen or entertainment space.

One of the primary features of the EdgeStar IB120SS is its ability to produce clear, high-quality ice. It produces up to 28 pounds of ice per day, ensuring you have a steady supply for gatherings, parties, or everyday use. Additionally, this unit has a large ice storage bin that can hold up to 12 pounds of ice at any given time, meaning you won’t have to constantly refill the machine during high-demand situations.

This ice maker is designed for easy operation and efficiency. It incorporates a simple on/off switch and an indicator light to ensure you're always aware of the unit's status. The internal water reservoir has a capacity of 3.2 liters, which means it can produce ice continuously without frequent refills. It's an ideal choice for those who prefer a hassle-free experience in ice production.

Technologically, the EdgeStar IB120SS is equipped with a powerful compressor that maximizes ice making efficiency while maintaining a compact footprint. With dimensions of just 15 inches wide, it can easily fit under counters or in tight spaces, making it a practical choice for various settings, from home kitchens to outdoor bars.

Durability is another key characteristic of the EdgeStar IB120SS. It features a robust stainless steel construction that not only looks good but also withstands the wear and tear of regular use. This resilience, coupled with trustworthy performance, ensures that this ice maker is built to last.

Maintenance is simplified by its self-cleaning function, allowing users to keep the unit hygienic and functional with minimal effort. Users can quickly access the internal components for cleaning, ensuring the machine operates at peak performance over time.

Overall, the EdgeStar IB120SS is a highly efficient and user-friendly ice maker that meets the needs of households, parties, and entertaining with ease. Its combination of production capacity, durable construction, and compact size makes it a smart choice for anyone in need of a reliable ice-making solution.
Top Page Image Contents