EdgeStar IB120SS Operating Your ICE Maker, Care and Maintenance, ¾ Initial START-UP Operation

Page 4

¾REVERSING THE DOOR SWING OF YOUR ICE MAKER

THIS APPLIANCE HAS THE CAPABILITY OF THE DOOR OPENING FROM EITHER THE LEFT OR RIGHT SIDE. THE UNIT IS DELIVERED TO YOU WITH THE DOOR OPENING FROM THE LEFT SIDE (HINGED ON THE RIGHT). TO REVERSE THE OPENING DIRECTION, PLEASE CALL CUSTOMER SERVICE FOR DIRECTIONS.

OPERATING YOUR ICE MAKER

¾INITIAL START-UP OPERATION

1.MAKE SURE THE UNIT IS PROPERLY INSTALLED BY A LICENCED PLUMBER.

2.MAKE SURE THE ON-OFF SWITCH IS IN THE “OFF” POSITION.

3.PLUG THE APPLIANCE INTO AN 115V POLARIZED AND GROUNDED WALL ELECTRICAL OUTLET.

4.PLACE THE ON-OFF SWITCH IN THE “ON” POSITION.

5.MAKE SURE THE WATER SUPPLY IS ON. AS SOON AS THE INNER MECHANISM REACHES THE PROPER TEMPERATURE, THE ICEMAKER COMPONENT WILL FILL THE MOLD WITH WATER.

6.THE FIRST CUBES MAY BE SMALL BECAUSE OF AIR IN THE WATER LINE. LATER CUBES WILL BE OF STANDARD CRESCENT MOON TYPE SIZE AND SHAPE.

7.THE APPROXIMATE TIME FOR THE FIRST CYCLE IS BETWEEN 30-40 MINUTES.

8.EACH CYCLE WILL TAKE ABOUT 5 OUNCES OF WATER SO YOU SHOULD HAVE A FULL TRAY AFTER ABOUT 11 HOURS.

IMPORTANT: THROW AWAY ALL ICE CUBES MADE DURING THE FIRST 3 HOURS OF OPERATION.

• WHEN THE ICE BUCKET IS FULL, THE ICE MAKING MECHANISM WILL

 

 

AUTOMATICALLY SHUT OFF. THE REFRIGERATION SYSTEM WILL

 

 

CONTINUE TO COOL AND MAINTAIN FREEZING TEMPERATURES WITHIN

 

•

THE UNIT.

 

THE ICE MAKING FUNCTION MAY BE TEMPORARILY STOPPED BY

 

 

RAISING THE METAL ARM INTO AN UPRIGHT POSITION (SEE FIGURE 2)

 

•

FIGURE 2

IF THE ICEMAKER IS NOT USED REGULARLY, WE RECOMMEND THAT THE

 

ICE BUCKET BE EMPTIED PERIODICALLY TO ENSURE FRESH ICE.

•SOMETIMES THE CUBES MAY APPEAR CLOUDY. THIS SHOULD NOT BE A CAUSE FOR CONCERN AND HAS NOTHING TO DO WITH THE TASTE OR CHEMICAL MAKE-UP OF THE WATER.

•THE FRONT GRILL SHOULD BE KEPT FREE OF DUST AND LINT TO PERMIT FREE AIRFLOW.

•THIS UNIT SHOULD BE DEFROSTED ABOUT EVERY 4-6 WEEKS OR WHEN FROST ON THE ICE MAKER WALLS IS EXCESSIVE (¼” THICK OR THICKER). TO DEFROST, TURN THE UNIT OFF, REMOVE/DISCARD THE EXISTING CUBES AND KEEP DOOR OPEN AT LEAST TWO INCHES. YOU MAY WANT TO PUT A TOWEL DOWN TO SOAK UP ANY WATER DRAINAGE CAUSED BY DEFROSTING THE UNIT.

•DO NOT SCRAPE OFF THE FROST WITH ANYTHING EXCEPT A PLASTIC SCRAPER.

CARE AND MAINTENANCE

¾CLEANING YOUR ICE MAKER

•TURN THE SWITCH CONTROL TO "OFF", UNPLUG THE ICE MAKER AND REMOVE THE BUCKET.

•WASH THE INSIDE WITH A WARM WATER AND BAKING SODA SOLUTION. THE SOLUTION SHOULD BE ABOUT 2 TABLESPOONS OF BAKING SODA TO A QUART OF WATER.

•WASH THE BUCKET WITH A MILD DETERGENT SOLUTION.

•THE OUTSIDE OF THE ICE MAKER SHOULD BE CLEANED WITH MILD DETERGENT AND WARM WATER.

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Important Safety Instructions Installation Instructions¾ Before Using Your ICE Maker ¾ Installation of Your ICE Maker¾ Electrical Connection Review State and Local Plumbing Codes Before Installation¾ Extension Cord Care and Maintenance ¾ Cleaning Your ICE MakerOperating Your ICE Maker ¾ Reversing the Door Swing of Your ICE Maker¾ Moving Your ICE Maker ¾ Vacation TIME/STORAGE¾ Energy Saving Tips Troubleshooting Guide Problems with Your ICE MAKER?Problem Possible Cause Limited Warranty What is Covered

IB120SS specifications

The EdgeStar IB120SS is a standout appliance in the realm of ice makers, designed for those who prioritize convenience and efficiency in their ice production needs. With a sleek stainless steel exterior, it not only serves a functional purpose but also adds a touch of modern sophistication to any kitchen or entertainment space.

One of the primary features of the EdgeStar IB120SS is its ability to produce clear, high-quality ice. It produces up to 28 pounds of ice per day, ensuring you have a steady supply for gatherings, parties, or everyday use. Additionally, this unit has a large ice storage bin that can hold up to 12 pounds of ice at any given time, meaning you won’t have to constantly refill the machine during high-demand situations.

This ice maker is designed for easy operation and efficiency. It incorporates a simple on/off switch and an indicator light to ensure you're always aware of the unit's status. The internal water reservoir has a capacity of 3.2 liters, which means it can produce ice continuously without frequent refills. It's an ideal choice for those who prefer a hassle-free experience in ice production.

Technologically, the EdgeStar IB120SS is equipped with a powerful compressor that maximizes ice making efficiency while maintaining a compact footprint. With dimensions of just 15 inches wide, it can easily fit under counters or in tight spaces, making it a practical choice for various settings, from home kitchens to outdoor bars.

Durability is another key characteristic of the EdgeStar IB120SS. It features a robust stainless steel construction that not only looks good but also withstands the wear and tear of regular use. This resilience, coupled with trustworthy performance, ensures that this ice maker is built to last.

Maintenance is simplified by its self-cleaning function, allowing users to keep the unit hygienic and functional with minimal effort. Users can quickly access the internal components for cleaning, ensuring the machine operates at peak performance over time.

Overall, the EdgeStar IB120SS is a highly efficient and user-friendly ice maker that meets the needs of households, parties, and entertaining with ease. Its combination of production capacity, durable construction, and compact size makes it a smart choice for anyone in need of a reliable ice-making solution.
Top Page Image Contents