Compact Refrigerators and Freezers Service and Installation Manual |
|
Contents |
|
Receiving & Inspecting Equipment | 2 |
Specifications | 3 |
Installation | 4 |
Caster Installation | 5 |
Caster/Leg Mounting Detail | 5 |
Operation | 6 |
Door Maintenance | 6 |
Defrosting | 6 |
Maintenance | |
Wiring Diagrams | 9 |
Drawer Assembly Drawing | 10 |
Replacement Parts Lists | 11 |
Standard Labor Guidelines | 12 |
Manufacturers Limited Warranty | 13 |
Standard Warranties | 14 |
Notes | 15 |
Serial Number Location
The serial number on 400 series compact refrigerators and freezers is printed on the right side of the interior back wall.
The serial number on 4000 and 4500 series compact refrigerators and freezers is printed under the top nosing directly above the door when door is in the closed position. Above the right hand door on two and three door models.
Always have the serial number of your unit available when calling for parts or service. A complete list of authorized Delfield parts depots is on www.delfield.com.
This manual covers standard units only. If you have a custom unit, consult the customer service department at
©2008 The Delfield Company. All rights reserved. Reproduction without written permission is prohibited.
“Delfield” is a registered trademark of The Delfield Company.
Receiving And Inspecting The Equipment
Even though most equipment is shipped crated, care should be taken during unloading so the equipment is not damaged while being moved into the building.
1.Visually inspect the exterior of the package and skid or container. Any damage should be noted and reported to the delivering carrier immediately.
2.If damaged, open and inspect the contents with the carrier.
3.In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment notify the carrier. Notification should be made verbally as well as in written form.
4.Request an inspection by the shipping company of the damaged equipment. This should be done within 10 days from receipt of the equipment.
5.Check the lower portion of the unit to be sure legs or casters are not bent.
6.Be sure to check the compressor compartment housing and visually inspect the refrigeration package. Be sure lines are secure and base is still intact.
7.Freight carriers can supply the necessary damage forms upon request.
8.Retain all crating material until an inspection has been made or waived.
For customer service, call (800)