Aiwa XR-EM50 manual Timer recording, To check the timer setting, To change the timer setting

Page 17

Timer recording

Timer recording is available only for TUNER and AUX (with an external timer) sources.

1Hold down SHIFT and press TIMER on the remote control repeatedly so that "5REC" is displayed.

2Within 6 seconds, press SET.

3Press for g to set the timer-on time, and press SET.

Each press changes the time in 1-minute steps. Holding these buttons down will vary the time in 10-minute units.

4Press for gto select the source, and press SET.

For timer recording of a radio broadcast, select "TUNER". You will select the band later in step 7.

For timer recording of the equipment connected to the AUX IN jacks, select "AUX (VIDEO or TV)".

5Press f or g to set the timer-activated duration, then press SET.

With each press, the timer-activated duration changes in 5-minute steps between 5 to 240 minutes.

6Press for gto adjust the volume for timer recording, and press SET.

The volume level can be adjusted from 0 to 16.

7Prepare the source.

To record the radio, select the band and tune in the desired station.

To record external equipment connected to the AUX IN jacks, set an external timer for the equipment so that its playback begins at the same time.

8Insert the recording tape and then turn the unit off.

"5 REC" remains on the display to indicate the timer standby mode (when ECO mode is deactivated).

At timer-on time, the unit turns on and records the selected source. After the specified timer-activated duration, the unit turns off again.

To stop timer setting in steps 3 to 6, press s. Timer standby mode is also canceled.

Connected equipment cannot be turned on or off by the built- in timer of this unit. Use an external timer.

When setting the timer on the unit Hold down sand press fin stop mode.

Repeat the above to select timer playback, timer recording or timer off mode, and use TONE instead of SET on the remote control in the following steps.

To check the timer setting

 

Hold down SHIFT and press TIMER on the remote control

 

repeatedly so that "5 PLAY" or "5 REC" appears on the

 

display.

 

The timer-on time, the source and the timer-activated duration

 

are displayed for 6 seconds.

 

To change the timer setting

En

Reset the timer again.

 

To cancel the timer

 

Hold down SHIFT and press TIMER on the remote control

 

repeatedly until "5 OFF" is displayed. "5" or

 

"5 REC" disappears from the display.

 

Tip:

 

Your timer setting is retained even if the timer is canceled.

 

Next time the timer is activated, you can change your previous

 

setting, or simply use the same setting again.

 

17

Image 17
Contents Model No Serial No. Lot No Owner’s recordExplanation of Graphical Symbols Important Safety InstructionsTable of Contents Preparations Remote controlConnection SpeakersMain unit front Parts and ControlsREV Mode TimerPower Tuner ModeSetting the clock Adjustments Before OperationPower ECO modePlaying a CD CD OperationsRandom/Repeat play To check the program Programmed playTo clear the program To add tracks to the programPreset tuning Manual tuningTo clear a preset station Tune in the station by preset tuningAdjustments Sound AdjustmentsVolume Bass and treblePlayback Tape PlaybackBasic recording Tape RecordingPreparation Edited CD recordingTo change the program of each side Repeat to select the rest of the tracks for side aTo clear the edit program Press stwiceSleep timer Timer OperationsTimer playback To cancel the sleep timerTo check the timer setting Timer recordingTo change the timer setting To cancel the timerReference Care and maintenanceTroubleshooting Specifications Précaution Reorient or relocate the receiving antennaRemarque

XR-EM50 specifications

The Aiwa XR-EM50 is a remarkable piece of audio technology that combines classic design with modern features, creating an exceptional listening experience. Released in the late 1990s, this portable mini system showcases Aiwa's dedication to high-quality sound and user-friendly functionality.

One of the primary features of the XR-EM50 is its compact design. The unit is designed to fit snugly into smaller spaces while still providing powerful audio output. Its sleek exterior coupled with a retro aesthetic appeals to both vintage audio enthusiasts and contemporary listeners. The system is equipped with dual speakers that deliver impressive sound clarity and depth, allowing for a rich listening experience across various genres of music.

The XR-EM50 incorporates advanced audio technologies that enhance playback quality. Its built-in CD player supports standard audio CDs as well as CD-R and CD-RW formats. The unit features a digital audio processor that optimizes sound performance, ensuring that each note is crisp and distinct. Additionally, the system supports AM/FM radio, enabling users to enjoy their favorite stations with excellent reception quality.

Another standout characteristic of the Aiwa XR-EM50 is its versatility. The unit is equipped with a cassette deck, allowing users to play and record from traditional cassette tapes, which was a valued feature in the era it was released. Furthermore, the inclusion of auxiliary inputs enables users to connect external devices like MP3 players or smartphones, expanding the system’s functionality.

User-friendliness is another aspect where the XR-EM50 shines. The intuitive control panel and remote allow users to easily navigate through tracks, adjust volume, and switch between different audio sources. The system also offers programmable playlist features, enabling customization for playback preferences.

The Aiwa XR-EM50 is also known for its durable construction, ensuring that it can withstand years of use while maintaining high performance. The system features a robust power amplifier, delivering ample wattage to fill any room with sound.

In summary, the Aiwa XR-EM50 is a classic mini audio system that combines retro charm with modern functionality. Its compact design, powerful sound output, versatile playback options, and user-friendly controls make it an appealing choice for anyone seeking to enhance their audio experience, whether at home or on the go.