Stand-By/Mute, Reset, IPOD/MP3 Player Jack

STAND-BY/MUTE

To mute the speaker system, press the button located on the control pod or wireless remote. The LED on the control pod will turn off. To un-mute, perform either command again.

Note: While in stand-by or mute mode, the system continues to receive power. To completely shut down the unit unplug the unit from the wall.

RESET

The button marked with the word "reset" on the wireless remote restores master volume, bass, treble, as well as center and rear volume to original factory settings.

You can also reset the system by pressing the stand-by button on the controller for 5 seconds.

IPOD/MP3 PLAYER JACK

The iPod or MP3 player jack is located on the side of the control pod. Use it to connect any audio source that has a stereo 3.5mm plug.

Caution: Make sure the audio source features a line-out jack. This will ensure that the output is not amplified. Check the owner’s manual for your audio device for more information.

HEADPHONES

The headphone jack is located on the side of the control pod. Use it to connect any stereo headphones with a 3.5mm plug.

Note: When headphones are connected, the speaker system is muted.

SYSTEM SPECIFICATIONS*

Altec Lansing’s superior sound comes from our patented Dynamic EQ technology, which utilizes custom-built, high-fidelity drivers, state-of-the- art equalization circuitry, and a harmonious mix of the following specifications:

Sound Pressure Level (SPL):	101 dB		Frequency Response:	30 Hz – 20 kHz (-10 dB)

Total Continuous Power:	89	Watts RMS	Signal to Noise Ratio
			@ 1 kHz input:	> 75 dB
• Front Speakers:	12	Watts/channel @ 4 ohms	@ 1 kHz input:	> 75 dB
• Front Speakers:	12	Watts/channel @ 4 ohms
	@ 10% THD @ 150 Hz – 20 kHz		Drivers (per satellite):	One 40mm mid-range driver and
	2 Channels Loaded			one 18mm high-end tweeter

• Rear Speakers:	12	Watts/channel @ 4 ohms	Subwoofer:	Two 6.5" long-throw woofers
	@ 10% THD @ 150 Hz – 20 kHz			in isobaric configuration
	2 Channels Loaded

• Center Speaker:	13	Watts @ 4 ohms
	@ 10% THD @ 150 Hz – 20 kHz
	Single Channel Loaded

• Subwoofer:	28	Watts @ 8 ohms

@ 10% THD @ 40 – 150 Hz

Single Channel Loaded

*Power rating conforms to FTC Amplifier Rule #16 C.F.R. Part 432.

FX5051 specifications

The Altec Lansing FX5051 is a powerful 5.1 speaker system designed to deliver an immersive audio experience for home entertainment. This multimedia speaker setup is particularly popular among music enthusiasts, gamers, and movie lovers who desire high-quality sound that envelops them in a rich audio environment.

One of the standout features of the FX5051 is its 5.1 channel surround sound capability. This system comprises five satellite speakers and a powerful subwoofer, providing a wide soundstage and ensuring that users can experience the full depth and detail of audio tracks, whether they are listening to music, watching films, or playing video games. The satellite speakers are designed to reproduce high and mid frequencies with clarity, while the subwoofer handles low-frequency sounds, adding depth to music and explosive effects in movies and games.

The FX5051 employs advanced audio technologies to enhance playback quality. This includes digital signal processing (DSP) which optimizes the sound output based on the content being played. Users can also benefit from multiple connectivity options, including RCA and 3.5mm inputs, making it compatible with a variety of devices such as TVs, computers, and gaming consoles. This versatility allows users to switch easily between devices without the need for complex setups.

Another important characteristic of the Altec Lansing FX5051 is its ergonomic design. The speakers are compact yet stylish, designed to fit seamlessly into any home environment. The subwoofer's sleek design enhances not only functionality but also aesthetics. Furthermore, the system typically includes a remote control, allowing users to adjust volume and settings without needing to access the speakers directly.

The FX5051 also features a user-friendly setup process. Users can easily connect the satellite speakers and subwoofer for a full surround sound experience without extensive technical expertise. The adjustable volume and bass control enable listeners to customize their audio experience to suit personal preferences.

In summary, the Altec Lansing FX5051 is a robust and stylish 5.1 speaker system that combines cutting-edge technology with user-friendly features. Its ability to provide dynamic, high-quality sound makes it an excellent choice for anyone seeking an upgraded audio experience in their home entertainment setup.