Using Your Main Oven

The main oven may be controlled by the programmer (see The Programmer/Clock for details).

The programmer, if fitted, must be set to manual before it can be used, or programmed.

Switching on the fanned oven

● Use the main oven control to turn your oven on, and select your temperature.

● Your appliance may be fitted with a thermostat indica- tor light. If it is, then this will come on to show that the oven is heating, and once the temperature is achieved, it will go out.

● To switch off the main oven, simply turn the control knob back to the ‘● ‘ position.

● The cooling fan will come on during use, and may continue to run for some time afterwards.

Switching on the multifunction oven

● Use the function control knob to select the function you wish to use - see the functions table for details.

Note: You can change function during cooking if you wish, as long as the oven is in manual mode.

● Turn the temperature control knob to the temperature you wish to use.

● Your appliance may be fitted with a thermostat indica- tor light. If it is, then this will come on to show that the oven is heating, and once the temperature is achieved, it will go out.

● To switch off the main oven, simply turn the control knob back to the ‘● ‘ position.

● The cooling fan will come on during use, and may con- tinue to run for some time afterwards.

Important: Never

i place food, or dishes on the base of the main oven, the element is here and it will cause over heating.