Installing Your Cooker
Connecting the electricity supply - Terminal Block
type B
●This appliance must be fitted using a double pole unit of 45 ampere minimum capacity with 3mm minimum contact at all poles.
●Access to the mains terminal is gained by removing the terminal block cover at the rear of the appliance.
●Connection should be made with a 10.0mm2 twin and earth cable.
●First strip the wires then push the cable through the cable clamp.
●Connect the cable to the terminal block and tighten the cable clamp screws - see diagram.
●Refit the terminal box cover.
●Sufficient cable should be used to allow the cooker to be pulled out, but must hang clear of the floor so it does not become twisted or trapped when the cooker is pushed back.
Please ensure that the user has this copy of the handbook, and the appliance is in place. Thank you.
27