Dacor Wine Steward/Beverage Cooler Temperature Control, Interior Light and Switch, Glass Shelves

Page 4

Temperature Control

The operating temperatures of the appliance range from the low forties to the mid fifties.

Do not install the appliance where the temperature will go below 55°F (13°C) or above 90°F (32°C).

NOTES:

As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet.

Temperatures at the bottom of the cabinet will be cooler than temperatures at the top of the cabinet.

Position your wine inventory accordingly (i.e. white wines in the cooler zones and red in the warmer zones).

When the temperature is adjusted, allow 24 hours for the unit to stabilize.

Beverage Cooler

To set the control, turn it to the midpoint setting (approximately 45ºF). Once the beverage cooler is loaded, allow at least 24 hours before making any adjustments to the initial setting.

Beverage Cooler Temperature Controls

Wine Steward

The RED WINE setting will provide a storage temperature of approximately 55ºF (13ºC), which is optimum for the storage for red wine.

The WHITE WINE setting will provide a storage temperature of approximately 45ºF (7ºC), which is optimum for white wine.

To set the control, turn it to the RED WINE setting. Once the bottles are loaded, allow at least 24 hours before making any adjustments to the initial setting.

Wine Cooler Temperature Controls

Interior Light and Switch

The interior light makes it easy to view your wine/beverage labels and enhances the display of your collection.

When the switch is in the OFF position, the light comes on only when the door is opened. When the switch is in the ON position, the light remains on continuously for your maximum viewing pleasure. For best viewing do not store a bottle on the top shelf directly under the light. Remember to turn off the light when it is no longer needed.

Glass Shelves

Tempered glass shelves in the beverage cooler unit are removable for easy cleaning or for storing larger items.

To remove a shelf, open the door completely to avoid potential damage to the gasket. Lift up on the back of the shelf slightly. Tilt the shelf to one side at an angle while pulling forward.

To replace a shelf, open the door completely to avoid potential damage to the gasket. Tilt the shelf to one side at an angle and slide toward the back wall, placing one side onto the shelf support. Place the other side onto the opposite shelf support. Ensure rear locking tabs are engaged. When installed properly, the shelf will not slide forward when gently pulled.

To remove, lift up on the back of the shelf

Tilt the shelf at an angle while removing or replacing

Place in slots when replacing the shelf

Removing Full Extension Drawers

The bottom full extension drawers pull out so bottles can conveniently be added or removed.

The upper full extension slide can be removed for magnums or larger bottles.

To remove:

1.Pull the full extension drawer out to the STOP position.

2.Push the tab on right drawer guide down while pulling the tab on left guide up, and pull the drawer out.

To replace:

1.Push the drawer slide arm back into the unit.

2.Pull the small slide sub assembly completely forward.

3.Insert the sides of the drawer back into the guides.

4.Push until the tabs lock into place.

Tab (push tab down on right drawer guide, pull tab up on left drawer guide)

To replace, push drawer slide

Pull small slide sub assembly

arm back into unit

completely forward

NOTE:

Make sure the tabs on the full extension drawer guides are fully engaged before loading any bottles. Pull the drawers out all the way to the STOP position and push back in several times to make sure locking tabs are properly engaged.

2

Image 4
Contents Use & Care Wine Steward/Beverage Cooler Dacor Purpose of This Manual Product Registration What to DoRisk of Child Entrapment RefrigerantsTemperature Control Interior Light and SwitchGlass Shelves Removing Full Extension DrawersCare and Cleaning Cleaning the InsideLight Bulb Replacement Event of a Power FailureProblem TroubleshootingPossible Cause Product Maintenance If You Need Service…What Is Covered What Is Not CoveredPage Page Page Business Reply Mail Warranty Information

Wine Steward/Beverage Cooler specifications

The Dacor Wine Steward/Beverage Cooler is a premier appliance designed for discerning wine and beverage enthusiasts who seek to preserve their collections in optimal conditions. With a stylish and modern design, this cooler not only adds elegance to any space but also ensures that your prized bottles are stored at the perfect temperature and humidity.

One of the standout features of the Dacor Wine Steward is its precise temperature control. Equipped with advanced digital thermostats, this cooler allows users to set and maintain the ideal temperature for both red and white wine. The temperature range typically spans from 40°F to 65°F, accommodating a variety of beverages, including sparkling wines, still wines, and even craft beers.

The dual-zone cooling system is another essential characteristic of this wine steward. It enables separate temperature settings for different types of beverages, ensuring that each one is stored in optimal conditions. This feature is particularly beneficial for collectors who keep a diverse array of bottles, allowing them to enjoy each drink at its best.

In addition to temperature control, the Dacor Wine Steward also incorporates active humidity control. Maintaining appropriate humidity levels is crucial for wine preservation, as it helps to keep corks moist and prevent spoilage. This cooler is designed to achieve a consistent humidity level, safeguarding your collection from potential damage due to drying out or excessive moisture.

The exterior design of the Dacor Wine Steward is both chic and functional. Its sleek, stainless steel finish and tempered glass door provide visibility to your collection while protecting it from harmful UV rays, which can degrade the quality of wine. The adjustable shelves are crafted from premium wood, enhancing aesthetics while providing robust support for bottles of various shapes and sizes.

Moreover, energy efficiency is a priority for Dacor. The Wine Steward is designed to consume minimal energy without compromising performance. This eco-friendly approach aligns with the growing demand for sustainable household appliances.

Overall, the Dacor Wine Steward/Beverage Cooler combines state-of-the-art technology with elegant design, catering to those who value both form and function in wine and beverage storage solutions. It effectively preserves the integrity of your beverages, making it a quintessential addition for any serious collector or casual enthusiast alike.