Caring for your Appliance, Defrosting

694527.qxd 1/31/03 9:18 Page 14

Caring for your Appliance.

DEFROSTING:

AUTOMATIC DEFROSTING OF THE REFRIGERATOR-

There is no need to defrost the refrigerator, because ice deposited on the interior back wall is defrosted automatically.

Ice is deposited on the interior back wall during the compressor operation, later on when the compressor is not operating, the ice defrosts and water droplets collect and drain through the outlet in the interior back wall into the drain pan situated above the compressor, from where it evaporates.

MANUAL DEFROSTING OF THE REFRIGERATOR- As long as the defrost water runs to the chan- nel and through the outlet to the drain pan on the compressor, automatic defrosting of the appliance is assured.

In the case of ice formation on the interior rear wall increasing (3-5mm), ice should be manually defrosted.

Set the thermostat knob to OFF (O) position and leave the refrigerator door open.

Never use electric devices for defrosting and do not scrape the ice with sharp objects. After defrosting is completed, turn the thermostat knob to the desired position and close the refrigerator door.

The cause of increased ice formation may be one of the following:

-The door does not seal well. (Clean the gasket if it is contaminated or replace it if it is damaged).

-The door was frequently opened or was left open for a long period.

-The food stored in the refrigerator was warm.

-Food or packaging is touching the interior rear wall.

MANUAL DEFROSTING OF THE FREEZER- When the frost and ice layer in the freezer is 3 - 5mm thick you should defrost the freezer.

●A few hours before defrosting, set the thermostat to position 7, so that packages are well frozen.

Reset the thermostat to OFF (O) position and disconnect the power supply. Empty the freezer, wrap frozen food in a blanket and put in a cool place.

●Insert the supplied pipe into the groove (the defrost water outlet) in the bottom of the appliance

●Place a vessel underneath to collect the defrost water. Defrosting is accelerated if the door is left open.

●Avoid using defrosting sprays, as they may cause damage to the plastic parts and may be hazardous to health.

REPLACING THE LIGHT BULB-

Should the light fail to work, switch off at the power point and pull out the plug. Remove the shelves to make access easier. Access to the bulb is from the rear of the cover (arrow 1) and remove the cover in the direction of (arrow 2).

Unscrew the old bulb. Screw the new bulb securely into the holder. Replace the plug in the power point and switch on. If the light fails to work, do not worry, it will not affect the working of your Larder Fridge. Obtain a replacement (max 15 watt 220-240V alternating current, E14 lampholder) from your nearest Spares Centre and replace the old bulb.

CM 311 I specifications

The Creda CM 311 I is a contemporary and efficient microwave oven designed for modern kitchens, offering both convenience and versatility. Its sleek design and user-friendly features make it an essential appliance for families, busy professionals, or anyone looking to simplify their cooking experience.

One of the standout features of the Creda CM 311 I is its impressive cooking capacity. With a spacious interior, this microwave accommodates large dishes, making it perfect for reheating leftovers or preparing meals for multiple people. The turntable ensures even cooking and heating, reducing cold spots and increasing overall efficiency.

The Creda CM 311 I incorporates various cooking modes and power levels, allowing users to customize their cooking preferences. With multiple pre-set programs, it simplifies the cooking process, enabling users to prepare a wide range of dishes with just the touch of a button. Whether it’s defrosting meat, baking potatoes, or steaming vegetables, this microwave offers the flexibility needed to handle any culinary task.

One of the most appealing technologies in the Creda CM 311 I is its inverter technology. Unlike traditional microwaves that cycle on and off, inverter technology provides a steady stream of power, ensuring even heating throughout the cooking process. This not only improves the quality of the food but also helps retain moisture and flavors in dishes.

The user-friendly control panel features an intuitive interface, making it easy to navigate through various settings. The digital display clearly indicates cooking times and power levels, allowing users to monitor their meals effortlessly. Additionally, the child lock feature provides an added layer of safety, making it ideal for homes with young children.

Energy efficiency is another characteristic that sets the Creda CM 311 I apart. Designed with eco-friendly technology, it consumes less energy compared to conventional ovens, making it an environmentally responsible choice. This appliance not only saves energy but also reduces utility costs.

Durability is a key consideration for any kitchen appliance, and the Creda CM 311 I boasts a robust build quality. The materials used in its design are both stylish and functional, ensuring that the microwave can withstand the rigors of daily use.

In summary, the Creda CM 311 I is a standout microwave oven that combines advanced technology, convenience, and style. With its array of features, including inverter technology, spacious cooking capacity, and energy efficiency, it is a versatile addition to any kitchen. Whether you're heating, cooking, or defrosting, the Creda CM 311 I promises to deliver excellent performance and impressive results, making meal preparation a breeze.