Ovens with |
| |
Microprocessor Controls |
| |
Rev. 10 (6/08) | Page 6 of 13 | 5925 Heisley Road • Mentor, OH |
|
| |
|
|
OPERATING INSTRUCTIONS (continued)
WARNING
BEFORE cleaning the cabinet:
1.Unplug cord from wall. Allow cabinet to cool.
2.Do NOT hose cabinet with water.
3.Do NOT get water on controls.
4.Do NOT use abrasives or harsh chemicals.
Wipe up spills as soon as possible.
Clean regularly to avoid heavy dirt
HOW TO CLEAN THE UNIT:
Cleaning Hints:
1.Use the mildest cleaning procedure that will do the job.
2.Always rub in the direction of the polish lines to avoid scratching the surface.
3.Use only a soft cloth, sponge, fibrous brushes, plastic or stainless steel pad for cleaning and scouring.
4.Rinse thoroughly with fresh water after every cleaning operation.
5.Always wipe dry to avoid water marks.
| SOIL | CLEANER | METHOD | ||
|
|
|
|
| |
| ROUTINE CLEANING | Soap, ammonia or mild | 1. | Sponge on with cloth | |
| detergent* and water. | 2. | Rinse | ||
|
| ||||
CABINET | STUBBORN SPOTS, | Mild abrasive made for | 1. Apply with damp sponge or cloth. | ||
Inside and Outside | STAINS | Stainless Steel. | 2. | Rub lightly. | |
|
|
|
| ||
BURNT ON FOODS OR | Chemical oven cleaner | Follow oven cleaner manufacturer’s | |||
| |||||
(Stainless Steel) | GREASE | made for Stainless Steel. | directions. | ||
| HARD WATER SPOTS & | Vinegar | 1. Swab or wipe with cloth. | ||
| SCALE | 2. | Rinse and dry. | ||
|
| ||||
| * Mild detergents include soaps and | ||||
MAINTENANCE INSTRUCTIONS
WARNING
IF UNIT GETS TOO HOT OR WON’T SHUT OFF, DISCONNECT
POWER AT BRANCH PANEL. DO NOT UNPLUG CORD!
If hot unit is NOT working, first check the following causes:
1.Cord is unplugged from wall outlet.
2.Circuit breaker/fuse to wall outlet is blown.
3.Switch is turned off.
4.Thermostat is turned off, or is set too low.
Call