Creda S036E manual Electrical Connection, Electrical connection, Mounting the power supply cable

Page 11

Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

WARNING:THIS APPLIANCE MUST BE EARTHED.

Mounting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To mount the power supply cable, proceed as follows:

Unscrew the cable clamp screw and the contact screws L-N-6.

Fasten the wires beneath the screwheads using the following colour scheme:Blue (N) Brown (L) Yellow-Green6

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Electrical Connection:

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

IMPORTANT:

After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A

Supply cable: 3x1.5mm2

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

This appliance conforms to the following EEC Directives:

Low Voltage Equipment 73/23/EEC 93/68/EEC

Electromagnetic Compatibility 89/336/EEC

93/68/EEC

Inner dimensions of the oven:

width 43.5cm

depth 40.0cm

height 32.0cm

Voltage and frequency of power supply:

230-240V 50-60Hz 2250-2400W

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens Norm EN 50304

Declared energy consumption for Forced convection Class

heating mode: Fan assisted

11

Image 11
Contents Instructions for Installation and Use Contents Introduction Always For Your SafetyOven light Know your OvenControls GrillElectronic Programmer Cooking Advice Cooking Chart Care and Cleaning Installation of Built-in Ovens InstallationElectrical Connection Mounting the power supply cableInner dimensions of the oven Voltage and frequency of power supplyKey Contacts

S036E specifications

The Creda S036E is a state-of-the-art electric storage heater designed to provide efficient and effective heating for different spaces. As part of the Creda range, the S036E combines modern design with advanced heating technologies, making it an excellent choice for residential and commercial use.

One of the main features of the Creda S036E is its impressive heating capacity. With a power output of 3.6 kW, this storage heater is capable of delivering substantial warmth to medium-sized rooms. The heater is equipped with a built-in thermostat that allows users to maintain their desired room temperature, ensuring comfort at all times.

The S036E utilizes a unique high-efficiency heating element that ensures rapid heat-up times and optimal energy usage. This technology not only reduces electricity consumption but also minimizes running costs, making the heater an economical option. Additionally, the unit features a thermal insulation layer that retains heat for longer periods, reducing the need for constant recharging during the night.

Another significant aspect of the Creda S036E is its intelligent control system, which offers programmable settings. Users can customize heating schedules according to their routines, ensuring that the space is only heated when necessary. This advanced feature helps to further enhance energy savings and contributes to more sustainable living.

The design of the S036E is sleek and modern, allowing it to blend seamlessly into various interior styles. It is compact in size, making it easy to install in both wall-mounted and free-standing configurations. Furthermore, the heater is equipped with safety features, including an overheat protection system that automatically cuts off power if the unit gets too hot, providing peace of mind for users.

Durability is another notable characteristic of the Creda S036E. Built with high-quality materials, this heater is designed to withstand the test of time, making it a reliable heating solution. The attractive white finish also ensures that it retains its visual appeal over the years.

In summary, the Creda S036E is a high-performance electric storage heater that combines efficiency, advanced technology, and stylish design. Its features such as programmable controls, rapid heating, and safety mechanisms make it an outstanding choice for anyone looking to improve their heating system while keeping energy costs in check.