Installation electrical requirements

FP089-01 Creda Gas Hob (W810) 12/09/2001 5:02 pm Page 9

INSTALLATION - electrical requirements

WARNING – THIS APPLIANCE MUST BE EARTHED.

CONNECT TO A 230-240V A.C. SUPPLY ONLY.

Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to but not directly above, and not more than 1.25m away from the appliance and capable of electrical isolation.

Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below.

NOTE: The removed plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket – with the obvious consequent danger.

IF THE FITTED PLUG IS REMOVED

The flexible mains lead must be correctly connected as below to a three pin plug of not less than 13 amp capacity. If a B.S. 1363 fused plug is used, it must be fitted with a 3 amp fuse which is approved to B.S. 1362.

IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in

accordance with the following code:

GREEN AND YELLOW	– EARTH
GREEN AND YELLOW	– EARTH	Blue to
BLUE	– NEUTRAL	Neutral
BROWN	– LIVE	Cord Clamp
		Cord Clamp

Green &

Yellow to

Earth

Brown to Live

3 Amp

Fuse

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:– The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with

the letter E or by the earth symbol or coloured green or green and yellow. The wire which is coloured blue must be connected to the terminal which is marked with the N or coloured black. The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red. When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. As the appliance must be earthed, do not use 2-pin

sockets outlets, if you are in doubt, consult a qualified electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size i.e. 0.75mm2 cross sectional area and temperature rating of 850 C e.g. heat resisting PVC.

IF A MOULDED PLUG IS FITTED

In the event of replacing a fuse in the plug supplied a 3 amp ASTA approved fuse to BS1362 must be fitted.

NOTE: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted. A new fuse cover can be obtained from your local Electricity Board. The colour of the correct replacement fuse cover is that of the coloured marks or inserts in the base of the plug.

Make sure that the cable does not become trapped.

W810 specifications

The Creda W810 is a highly-regarded washing machine known for its practical features and user-friendly design. With a blend of efficiency and performance, it caters to households looking for reliable laundry solutions. Engineered for durability, the W810 combines modern technology with user convenience.

One of the key features of the Creda W810 is its generous wash capacity, accommodating up to 8 kg of laundry. This allows families to complete substantial loads in a single wash cycle, saving time and energy. Despite its capacity, the machine maintains a compact design, making it suitable for various living spaces without compromising on performance.

The W810 is equipped with an array of wash programs tailored to different fabric types and laundry needs. From cotton to delicate fabrics, the machine provides specialized cycles that optimize washing conditions, ensuring clothes are cleaned effectively while minimizing the risk of damage. Additional quick wash options cater to users in a hurry, allowing small loads to be washed in under 30 minutes.

Energy efficiency is another hallmark of the Creda W810. It boasts an impressive energy rating, which means it consumes less electricity compared to older models. This not only contributes to lower utility bills but also supports environmentally friendly practices, making it a responsible choice for eco-conscious consumers.

In terms of technology, the W810 features a user-friendly digital display that makes it easy to select programs and monitor cycle progress. The intuitive controls enhance the user experience, enabling individuals to customize their washing needs with ease. Additionally, the machine is designed with noise reduction technology, ensuring quieter operation and enhanced comfort during use, especially in open living areas.

Durability and construction are other significant characteristics of the Creda W810. It is built with high-quality materials that ensure longevity, coupled with robust engineering that stands up to frequent use. The drum is designed to provide gentle yet effective agitation, safeguarding the fabric quality of garments.

Overall, the Creda W810 represents a thoughtful combination of functionality, efficiency, and convenience. Its array of features and advanced technologies make it a popular choice for modern households, providing reliable washing solutions that cater to diverse laundry needs while maintaining a focus on energy efficiency and user satisfaction.