Creda W810 manual GAS Safety Installation & USE Regulations, Location, Provision for Ventilation

Page 11

FP089-01 Creda Gas Hob (W810) 12/09/2001 5:02 pm Page 11

INSTALLATION INSTRUCTIONS

Prior to installation, ensure that the local distributions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the rating plate which is fitted on the underside of the base panel. This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. Particular attention should be given to the relevant requirements regarding ventilation.

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law.

In the UK, CORGI registered installers work to safe standards of practice.

The cooker must also be installed in accordance with BS 6172:

Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

LOCATION

The cooker may be located in a kitchen, kitchen/diner or a bed-sitting room, but not in a room containing a bath or shower. The cooker must not be installed in a bed- sitting room of less than 20m3.

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440: Part 2.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2 should be consulted to determine air vent requirements.

11

Image 11
Contents Instructions for Installation USE Gas Hob W810 Contents Introduction Always For Your SafetySafety Advice Never Operation When Using the GAS HOB Using the GAS HOB FeaturesCare and Cleaning If the Ignition does not Work Something Wrong ?Installation electrical requirements Gas Category II2H3+ GB,IE Installation InstructionsProvision for Ventilation GAS Safety Installation & USE RegulationsLocation Fitting the HOB InstallationSiting the HOB Fixing Clamp LPG Conversion Instructions for Model W810, BG05 FP089-01 Creda Gas Hob W810 12/09/2001 502 pm Key Contacts

W810 specifications

The Creda W810 is a highly-regarded washing machine known for its practical features and user-friendly design. With a blend of efficiency and performance, it caters to households looking for reliable laundry solutions. Engineered for durability, the W810 combines modern technology with user convenience.

One of the key features of the Creda W810 is its generous wash capacity, accommodating up to 8 kg of laundry. This allows families to complete substantial loads in a single wash cycle, saving time and energy. Despite its capacity, the machine maintains a compact design, making it suitable for various living spaces without compromising on performance.

The W810 is equipped with an array of wash programs tailored to different fabric types and laundry needs. From cotton to delicate fabrics, the machine provides specialized cycles that optimize washing conditions, ensuring clothes are cleaned effectively while minimizing the risk of damage. Additional quick wash options cater to users in a hurry, allowing small loads to be washed in under 30 minutes.

Energy efficiency is another hallmark of the Creda W810. It boasts an impressive energy rating, which means it consumes less electricity compared to older models. This not only contributes to lower utility bills but also supports environmentally friendly practices, making it a responsible choice for eco-conscious consumers.

In terms of technology, the W810 features a user-friendly digital display that makes it easy to select programs and monitor cycle progress. The intuitive controls enhance the user experience, enabling individuals to customize their washing needs with ease. Additionally, the machine is designed with noise reduction technology, ensuring quieter operation and enhanced comfort during use, especially in open living areas.

Durability and construction are other significant characteristics of the Creda W810. It is built with high-quality materials that ensure longevity, coupled with robust engineering that stands up to frequent use. The drum is designed to provide gentle yet effective agitation, safeguarding the fabric quality of garments.

Overall, the Creda W810 represents a thoughtful combination of functionality, efficiency, and convenience. Its array of features and advanced technologies make it a popular choice for modern households, providing reliable washing solutions that cater to diverse laundry needs while maintaining a focus on energy efficiency and user satisfaction.