Creda GDW51 installation instructions

Page 1

GDW51

Use & Installation Instructions

Alkaline AA

NOTE: This appliance is fitted with a battery powered ignition system. Should the ignition system start to spark slowly - or not at all, the battery will need replacing. See the section on battery replacement.

The cooker must be installed in accordance with the regulations in force

and only used in a well ventilated space.

Read these instructions prior to installing or using the cooker and retain

them for future reference.

The data badge is located below the oven door on the plinth panel.

Image 1

Contents GDW51 Creda Answer Centre 08701 Contents Introduction Fitting/Replacing the BatteryAlways For Your SafetyFor Your Safety Never Hotplate How to Deal with a Fat FireTo Use Hotplate For Deep Fat FryingTo use the Top Oven Top OvenLighting the burner Meat and Poultry Top Oven Cooking ChartYeast Mixtures To use the grill GrillRelighting the burner Main OvenRoasting large Cold start cookingPoultry StorageMeat and Poultry Main Oven Cooking ChartTray Mins ‘Slow Cook’ Setting Care and Cleaning Paint Vitreous EnamelAluminium Chromium PlatingTime Oven cooks too fast or too Amount of smoke whenSlow Ignition does not workInstallation Instructions General Technical Data DimensionCooker Hoods Unpacking the Cooker Levelling Stability Bracket Connecting To The Gas SupplyChecks OperationalPage Page Page Key Contacts