Installation Instructions
Operational | After installation, check for gas soundness. The supply pressure can be |
Checks | checked at the grill injector. Access to the injector is by first removing |
| the baffle at the front of the grill fastened by two screws. Then remove |
| the fastening screw on the right hand side of the burner and slide the |
| burner off the injector. Ensure that the grill burner is correctly located |
| under the fixing screw on reassembly. |
| Fit the battery. Fit the hotplate burner bodies, enamelled discs and pan |
| supports. Referring to the instructions for use where |
| necessary. |
| 1. Check that the hotplate burners ignite correctly and burn with a |
| steady flame. Check for a steady flame on the low setting. |
| 2. Check that the grill burner ignites correctly and burns with a steady |
| flame. |
| 3. Check that, with the top oven set to mark 8, the burner ignites |
| correctly and burns with a steady flame. Leave the oven full on with |
| the door closed for 10 minutes and check that when the control is |
| turned to mark 1 the flame reduces. |
| 4. Check that with the oven set to mark 9, the burner ignites at low rate |
| and then increases to full rate within 60 seconds. Leave the oven full |
| on with the door closed for 10 minutes, and check that when the |
| control is turned to the ‘E’ setting that the flame reduces. |
| Instruct the user on the operation of the cooker. |
24