Creda S220E manual Operation when using the Grill

Page 12

Operation when using the Grill

SHELF POSITIONING FOR GRILLING

3

3

2

2

1

1

Do not place food / utensils directly on the oven floor.

There should be at least 25mm (1 inch) between the top of the food and the grill element.

NOTE: Preheat the grill at setting 6 on the grill control for approximately 5 minutes. The grill pan must be placed on the correct shelf and positioned centrally under the grill element.

Leave the control at 6 for toast, and for fast cooking of foods.

For thicker foods requiring longer cooking, turn the switch to a lower setting after the initial sealing on both sides at 6. The thicker the food, the lower the control should be set.

DO NOT line the grill pan with aluminium foil, as this increases the amount of fat spitting which can cause a fire.

After use always return controls to their OFF (0) position.

AGRILL CONTROL

Step 1 Place the shelf in the correct position (see Grilling Guide).

Place the food/grill pan on the shelf, positioned centrally under the grill element. Leave the top oven door full open.

Step 2 Turn knob (A) clockwise to select TWIN GRILL or anti-clockwise to select SINGLE GRILL Grill Setting (1–4). (1=Low, 4=High).

Grill Controls Example:

4= Maximum Grill Setting

NOTE:

Do not grill with the grill door closed.

Step 3

After use, turn control A

 

anti clockwise to the off (0) position.

DOOR

POSITION

FOR

 

 

GRILLING.

DO NOT allow young children near to the appliance when the grill is in use as the surfaces get extremely hot.

12

Image 12
Contents S220E Installation & User Instructions Creda Answer Centre 08701 54 64 Creda Answer Centre 0541 54 64Contents Introduction Disposal of your product89/336/EEC 73/23/EEC 92/31/EEC 93/68/EEC Safety Information Safety AdviceAlways Safety Information Never Features Controls Control MarkingsTimer incorporates a 24 hour clock Clock/Minute Minder OperationMinute Minder Any period up to 99 minutes and 50 seconds Display shows Hours and Minutes eg hour 41 minutesGrill Pan and Handle StepOperation when using the Grill Do not place food / utensils directly on the oven floorSetting 4Setting6Setting FoodUsing the Oven for Fan Cooking Oven Shelf Positioning for FAN OvenOven Utensils FAN Oven OperationUsing the Oven for other Functions Fan Only SettingLight Only Setting Operation To assist in defrosting‘S’ Slow Setting Points to consider when preparing food for Slow cookingAdvantages of Slow cooking are OperationTemperature Conversion Chart Gas Mark Main Conventional Oven Top Convection FanOven Temperature Chart Meat If Using Aluminium FoilOven Temperature Chart Baking Baking Main Fan Oven CookingCooking Result Not Satisfactory? GrillBaking Care and Cleaning Credaclean Oven Liners Main OvenHow Credaclean works Higher the temperature the more effective it isCleaning Grill and Main Oven Oven DoorsReplacement of the Oven Lamp HOW to Clean the Lamp LensTo Clean the Inside of Outer and Inner Glass Panels Clean, dry clothDoor panel, see fig Holding door together, refit the two screwsInstallation Electrical RequirementsElectrical Connections All cases adhere to routing details see figFinal Installation GeneralTop Wall Fixing Bracket Cooker 1mm min Cabinet Doors Hob CableCurrent Cable to Rating BS 6141 Table Appliance/sProblem Check Something Wrong?Page Page Key Contacts For further product information 08701

S220E specifications

The Creda S220E is a robust and versatile electric storage heater designed for efficient heating solutions in residential and commercial spaces. Its sleek and modern design is tailored to blend seamlessly into any interior, while ensuring optimal performance and energy efficiency.

One of the standout features of the Creda S220E is its advanced thermal storage technology. This heater harnesses energy during off-peak hours, storing heat that can be released gradually throughout the day. This characteristic not only helps to reduce energy costs but also supports responsible energy consumption, making it an eco-friendly choice.

The Creda S220E comes equipped with a user-friendly control panel that allows for easy temperature adjustments and programming. This feature empowers users to tailor their heating schedules according to their preferences and lifestyle, ensuring comfort whenever it is needed. The programmable options enable users to set different heating levels for various times of the day, maximizing efficiency and minimizing energy wastage.

Another significant feature of the Creda S220E is its built-in overheat protection system. This safety mechanism provides peace of mind, ensuring that the heater automatically shuts off if it becomes too hot, thereby preventing potential hazards. Furthermore, the heater operates quietly, making it ideal for bedrooms or study areas where noise can be distracting.

In terms of performance, the Creda S220E has a powerful output, making it suitable for larger rooms or spaces requiring substantial heating. Its compact design does not compromise on performance; rather, it intelligently disperses heat, providing a comfortable environment throughout the area.

The heater is constructed from high-quality materials, enhancing its durability and longevity. Its maintenance requirements are minimal, allowing users to enjoy the benefits of reliable heating with ease.

Overall, the Creda S220E stands out in the market thanks to its combination of efficiency, safety features, and user-friendly operation. It offers a smart heating solution for those looking to maintain a comfortable living or working environment without the burden of excessively high energy bills. As energy costs continue to rise, the Creda S220E offers a practical and sustainable choice for heating needs.