Creda S220E manual Installation, Electrical Requirements, Electrical Connections

Page 25

Installation

Electrical Requirements

For your own safety, we recommend that your cooker is installed by a competent person such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest edition of the IEE Regulations.

Warning: This appliance must be earthed.

Electrical Connections

The installer must check that the voltage shown at the rating plate corresponds with the house electricity supply.

The cooker must be supplied via a suitable double pole isolating switch, having a contact separation of at least 3mm in all poles placed in a readily accessible position adjacent to the cooker.

If the cooker is to be wired into a connector unit, this may be positioned behind the cooker providing the following requirements are met:

i)The connector unit must not project from the wall more than 25mm.

ii)The top of the connector must not be more than 130mm above floor level.

Remove the terminal cover at the rear base of the cooker. Pass the cable through the cable clamp and connect to the appropriate terminals provided.

Allow sufficient cable for any future servicing.

Tighten the screws on the cable clamp and replace the cover.

Make main connections in the connector unit or cooker control unit.

This appliance conforms to B.S. EN 55014 regarding suppression of Radio and Television reception interference.

Adouble Pole control switch having a minimum rating of 32 amps should be used to feed the cooker using a suitably rated cable.

Where a hob is fitted adjacent to or over the cooker, a 45 amp Double Pole control switch should be used to feed both units via separate suitably rated cables.

We recommend a minimum of 4mm2 PVC insulated twin and earth cable conforming to B.S. 6004 for connection of each appliance.

Where a hob is fitted above the cooker the cable connecting the hob to the cooker control unit must be of 2.5mm2 85˚C heat resistant cable to BS6141 table 15

In all cases adhere to routing details (see fig. 5).

This appliance must not be installed over any other appliance that generates heat such as a plinth heater

Note: Due to many different types of installation, a mains cable is not supplied with this

product. The installer will fit the correct type and length of cable.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents S220E Installation & User Instructions Creda Answer Centre 0541 54 64 Creda Answer Centre 08701 54 64Contents Disposal of your product Introduction89/336/EEC 73/23/EEC 92/31/EEC 93/68/EEC Safety Advice Safety InformationAlways Safety Information Never Features Control Markings ControlsClock/Minute Minder Operation Timer incorporates a 24 hour clockMinute Minder Display shows Hours and Minutes eg hour 41 minutes Any period up to 99 minutes and 50 secondsStep Grill Pan and HandleDo not place food / utensils directly on the oven floor Operation when using the Grill4Setting Setting6Setting FoodOven Shelf Positioning for FAN Oven Using the Oven for Fan CookingOven Utensils FAN Oven OperationFan Only Setting Using the Oven for other FunctionsLight Only Setting Operation To assist in defrostingPoints to consider when preparing food for Slow cooking ‘S’ Slow SettingAdvantages of Slow cooking are OperationGas Mark Main Conventional Oven Top Convection Fan Temperature Conversion ChartIf Using Aluminium Foil Oven Temperature Chart MeatBaking Main Fan Oven Cooking Oven Temperature Chart BakingGrill Cooking Result Not Satisfactory?Baking Credaclean Oven Liners Main Oven Care and CleaningHow Credaclean works Higher the temperature the more effective it isOven Doors Cleaning Grill and Main OvenHOW to Clean the Lamp Lens Replacement of the Oven LampClean, dry cloth To Clean the Inside of Outer and Inner Glass PanelsDoor panel, see fig Holding door together, refit the two screwsElectrical Requirements InstallationElectrical Connections All cases adhere to routing details see figGeneral Final InstallationTop Hob Cable Wall Fixing Bracket Cooker 1mm min Cabinet DoorsCurrent Cable to Rating BS 6141 Table Appliance/sSomething Wrong? Problem CheckPage Page For further product information 08701 Key Contacts

S220E specifications

The Creda S220E is a robust and versatile electric storage heater designed for efficient heating solutions in residential and commercial spaces. Its sleek and modern design is tailored to blend seamlessly into any interior, while ensuring optimal performance and energy efficiency.

One of the standout features of the Creda S220E is its advanced thermal storage technology. This heater harnesses energy during off-peak hours, storing heat that can be released gradually throughout the day. This characteristic not only helps to reduce energy costs but also supports responsible energy consumption, making it an eco-friendly choice.

The Creda S220E comes equipped with a user-friendly control panel that allows for easy temperature adjustments and programming. This feature empowers users to tailor their heating schedules according to their preferences and lifestyle, ensuring comfort whenever it is needed. The programmable options enable users to set different heating levels for various times of the day, maximizing efficiency and minimizing energy wastage.

Another significant feature of the Creda S220E is its built-in overheat protection system. This safety mechanism provides peace of mind, ensuring that the heater automatically shuts off if it becomes too hot, thereby preventing potential hazards. Furthermore, the heater operates quietly, making it ideal for bedrooms or study areas where noise can be distracting.

In terms of performance, the Creda S220E has a powerful output, making it suitable for larger rooms or spaces requiring substantial heating. Its compact design does not compromise on performance; rather, it intelligently disperses heat, providing a comfortable environment throughout the area.

The heater is constructed from high-quality materials, enhancing its durability and longevity. Its maintenance requirements are minimal, allowing users to enjoy the benefits of reliable heating with ease.

Overall, the Creda S220E stands out in the market thanks to its combination of efficiency, safety features, and user-friendly operation. It offers a smart heating solution for those looking to maintain a comfortable living or working environment without the burden of excessively high energy bills. As energy costs continue to rise, the Creda S220E offers a practical and sustainable choice for heating needs.
Top Page Image Contents