Creda H250E manual Oven Cookery Notes

Page 24

Oven

Oven Control

With the oven door closed, heating of the oven is achieved by turning the control clockwise to the required ‘oven temperature’ scale on the control panel, as recommended in the temperature charts. The pilot light will immediately come on and go off during cooking as the thermostat maintains the correct temperature.

Note: At the end of the cooking period there may be a momentary puff of steam when the oven door is opened. This will disperse in a few seconds and is perfectly normal characteristics of an oven with a good door seal.

Note: Remember to switch off the oven control after cooking is finished.

To prepare meat for roasting in your electric oven

Oven Cookery Notes

The ‘oven temperature charts’ are a guide only, giving approximate cooking temperatures and times. To suit personal taste and requirements, it may be necessary to increase or decrease temperatures by 10oC.

Wipe the joint, dry well with a clean cloth, kitchen tissue, etc., and weigh it. Meat which has been stored in a refriger- ator, should be allowed to come to room temperature for approximately 30 minutes before cooking. Always com- pletely thaw frozen meat before cooking. Beef, lamb and mutton may be lightly floured, but pork should have the rind scored, brushed over lightly with olive oil, and sprinkled with salt – for crisp crackling.

Place the joint in a suitably sized meat pan (a small joint in a large meat pan causes unnecessary oven splashing). Small joints weighing less than 1.5kg (3lbs) may be pot roasted. Additional fat should not be used, except for veal, very lean meat, poultry, which can either be ‘larded’ with fat bacon, or brushed over very sparingly with melted fat/cooking oil. When potatoes are roasted round the joint, they only require to be coated in melted fat/cooking oil. It is not necessary to baste, when roasting in an electric oven, and liquid/stock should not be added to a meat pan.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents H250E Creda Answer Centre 08701 54 64 Contents Introduction Disposal of Your ProductInstallation Safety Information AlwaysSafety Advice in Case of a CHIP-PAN Fire Do not Leave Deep FAT Frying Pans Unattended While CookingFeatures Control Panel Control KnobsControl Settings Guide Safety Requirements for Deep FAT FryingHotplates General Information Notes USE of HotplatesHob General Information Choice of UtensilsPans should not Temperature Conversion Chart MarkGrill Never line the grill pan with aluminium foilGrill Chart Guide To GrillingOven Timer Operation Timer OperationAutomatic Cooking Know Your Timer Timer FunctionsClock & Automatic Oven Timer Operation To SET & RE-SET the Time of DAYAuto Cooking Programmes Cooking programme to start Clock & Automatic Oven Timer Operation Top Oven Cookery Notes TOP Oven CookingCooking MEAT/POULTRY in the TOP Oven TOP Oven AS a HOT CupboardTop Oven Temperature Chart Baking Top Oven Temperature Chart Meat Oven Oven Cookery NotesTemperature and Time Meat pan and rod shelves Main oven Temperature Chart Baking Main oven Temperature Chart Meat Care and Cleaning Control PanelVitreous Enamel HOB Spillage CompartmentHOW ‘CREDACLEAN’ Works ‘CREDACLEAN’ Oven LinersCleaning Materials to Avoid GRILL/TOP OvenCooking Results Not Satisfactory GrillProblem Check Something Wrong ?Key Contacts

H250E specifications

The Creda H250E is a contemporary electric heater designed to provide efficient and effective heating solutions for residential settings. Known for its reliability and innovative features, this model has become a popular choice among homeowners seeking comfort and convenience.

One of the standout characteristics of the Creda H250E is its energy efficiency. It utilizes a highly effective heating element that maximizes warmth while minimizing energy consumption. With a power output of 2.5 kW, the H250E quickly raises the temperature in any room, ensuring a comfortable environment even in the coldest months. Its rapid heat-up time means that users can enjoy immediate warmth upon activation, eliminating the waiting period often associated with traditional heating systems.

The Creda H250E is equipped with user-friendly controls that allow for easy operation. The unit features a simple dial interface, which enables users to set their desired temperature with precision. This intuitive control mechanism simplifies the heating process, making it accessible for all members of the household.

Safety is a top priority for the Creda H250E, and the heater is designed with several protective features. It includes overheat protection, which automatically shuts off the unit if it reaches unsafe temperatures. Additionally, it is equipped with a tip-over switch that turns the heater off if it is knocked over, preventing potential hazards and offering peace of mind for families.

The design of the H250E blends seamlessly into various interior styles. Its sleek and modern aesthetic allows it to fit into any decor while taking up minimal space. This heater can be mounted on walls, which saves valuable floor space and enhances the overall room appearance. The compact form factor makes it suitable for smaller areas while still delivering powerful heating performance.

Furthermore, the Creda H250E incorporates advanced thermal technology that ensures consistent heat distribution throughout the room. This feature eliminates cold spots, creating a more comfortable living environment. With its combination of efficiency, safety, and aesthetic appeal, it stands out as an excellent heating solution for modern homes, catering to the needs of comfort, style, and sustainability. The Creda H250E reaffirms its status as a dependable heating companion for anyone looking to improve their indoor climate.
Top Page Image Contents