Creda H250E manual Installation

Page 5

Installation

WARNING – THIS APPLIANCE MUST BE EARTHED.

MAINS CONNECTION

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the rear panel.The cooker must be connected by a competent person such as a NICEIC registered contractor to suitable double- pole control unit with a minimum rating of 45A and a minimum contact clearance of 3mm, which should be fitted adjacent to the cooker, in accordance with IEE regulations. The control unit must be within 2 metres of but not directly above the appliance and should be easily accessible in the event of an emergency.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2, minimum. Access to the mains terminals is gained by removing the rear access cover. The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

COOKER HEIGHT

Your cooker must stand on a flat surface so that the hob is perfectly level, and the cooker is stable and cannot be rocked.

SITING THE COOKER

The cooker is designed to fit between kitchen cabinets spaced 500mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in an angled corner setting. It can also be used freestanding. This cooker is a type X appliance, as such adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer 650mm.

MOVING THE COOKER

Before moving your cooker, switch off at the cooker control unit, ensure that it is cool.

Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements.

Note: Take care in moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged.

RADIO INTERFERENCE

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

5

Image 5
Contents H250E Creda Answer Centre 08701 54 64 Contents Disposal of Your Product IntroductionInstallation Always Safety InformationDo not Leave Deep FAT Frying Pans Unattended While Cooking Safety Advice in Case of a CHIP-PAN FireFeatures Control Knobs Control PanelSafety Requirements for Deep FAT Frying Control Settings GuideHotplates General Information Notes USE of HotplatesPans should not Hob General InformationChoice of Utensils Mark Temperature Conversion ChartNever line the grill pan with aluminium foil GrillGuide To Grilling Grill ChartAutomatic Cooking Oven Timer OperationTimer Operation Timer Functions Know Your TimerTo SET & RE-SET the Time of DAY Clock & Automatic Oven Timer OperationAuto Cooking Programmes Cooking programme to start Clock & Automatic Oven Timer Operation TOP Oven Cooking Top Oven Cookery NotesCooking MEAT/POULTRY in the TOP Oven TOP Oven AS a HOT CupboardTop Oven Temperature Chart Baking Top Oven Temperature Chart Meat Oven Cookery Notes OvenTemperature and Time Meat pan and rod shelves Main oven Temperature Chart Baking Main oven Temperature Chart Meat Control Panel Care and CleaningVitreous Enamel HOB Spillage Compartment‘CREDACLEAN’ Oven Liners HOW ‘CREDACLEAN’ WorksCleaning Materials to Avoid GRILL/TOP OvenGrill Cooking Results Not SatisfactorySomething Wrong ? Problem CheckKey Contacts

H250E specifications

The Creda H250E is a contemporary electric heater designed to provide efficient and effective heating solutions for residential settings. Known for its reliability and innovative features, this model has become a popular choice among homeowners seeking comfort and convenience.

One of the standout characteristics of the Creda H250E is its energy efficiency. It utilizes a highly effective heating element that maximizes warmth while minimizing energy consumption. With a power output of 2.5 kW, the H250E quickly raises the temperature in any room, ensuring a comfortable environment even in the coldest months. Its rapid heat-up time means that users can enjoy immediate warmth upon activation, eliminating the waiting period often associated with traditional heating systems.

The Creda H250E is equipped with user-friendly controls that allow for easy operation. The unit features a simple dial interface, which enables users to set their desired temperature with precision. This intuitive control mechanism simplifies the heating process, making it accessible for all members of the household.

Safety is a top priority for the Creda H250E, and the heater is designed with several protective features. It includes overheat protection, which automatically shuts off the unit if it reaches unsafe temperatures. Additionally, it is equipped with a tip-over switch that turns the heater off if it is knocked over, preventing potential hazards and offering peace of mind for families.

The design of the H250E blends seamlessly into various interior styles. Its sleek and modern aesthetic allows it to fit into any decor while taking up minimal space. This heater can be mounted on walls, which saves valuable floor space and enhances the overall room appearance. The compact form factor makes it suitable for smaller areas while still delivering powerful heating performance.

Furthermore, the Creda H250E incorporates advanced thermal technology that ensures consistent heat distribution throughout the room. This feature eliminates cold spots, creating a more comfortable living environment. With its combination of efficiency, safety, and aesthetic appeal, it stands out as an excellent heating solution for modern homes, catering to the needs of comfort, style, and sustainability. The Creda H250E reaffirms its status as a dependable heating companion for anyone looking to improve their indoor climate.