Creda S912E manual Advice and recommendations

Page 4

Advice and recommendations

This appliance was designed for non-professional, household use.

Before using the appliance, read the instructions in the owner’s manual carefully since it contains all the instruc- tions you require to ensure safe installation, use and main- tenance. Keep this owner’s manual in a safe place for fu- ture reference.

When you have removed the packing, check whether the appliance is intact. If you have any doubts, contact a qualified professional before using the appliance.

Never leave the packing components (plastic bags, polystyrene foam, nails, etc.) within the reach of children since these are a source of potential danger.

The appliance must be installed by a qualified techni- cian in compliance with the instructions provided by the manufacturer.

The latter denies all responsibility for improper instal- lation which may harm persons and animals and damage property.

The electrical safety of this appliance can only be guar- anteed if the latter is correctly and efficiently earthed, in compliance with regulations on electrical safety. Always ensure that this vital safety measure has been taken. If you have any doubts, call in a qualified technician to check the electrical system thoroughly.

The manufacturer denies all responsibility for damage resulting from a system which has not been earthed cor- rectly.

Before powering the appliance, check whether the tech- nical characteristics featured on the appliance data plate correspond with those of the mains electrical system.

Check that the current load of the mains supply and of the power sockets is suitable for the maximum power of the appliance, indicated on the appliance data plate. If in doubt, contact a qualified professional.

This appliance must only be used for the purpose for which it was expressly designed. Any other use (such as heating a room for example) is considered to be improper and consequently dangerous.

The manufacturer denies all responsibility for damage resulting from improper or incorrect use of the appliance.

Certain fundamental rules must be followed when us- ing electrical appliances. The following are of particular importance:

do not touch the appliance with wet or damp hands,

never use the appliance when barefoot,

never use extensions,

never pull on the power supply cable or the appli- ance itself to unplug it from the mains socket,

never leave the appliance exposed to atmospheric agents (rain, sun, etc.),

do not allow children or persons who are not famil- iar with the appliance to use it without supervision.

Always unplug the appliance from the mains or switch off the main switch before cleaning or performing any cleaning or maintenance operations.

If the surface of the glass cracks, unplug the ap- pliance immediately. For any repairs, contact only an au- thorised after-sales service centre and demand original spare parts. Failure to comply with the above may com- promise the safety of the appliance.

Cut the power supply cable after disconnecting it from the power mains when you decide not to use the appli- ance any longer. Also make all potentially dangerous parts of the appliance safe, above all for children who could play with the appliance.

The glass ceramic hob is resistant to thermal and me- chanical shocks. However, it may break due to a shock caused by a sharp object, such as a tool for example. In this case, unplug the appliance immediately and contact an authorised after-sales service centre to have it repaired.

Remember that the heating area stays hot for at least half an hour after being turned off; please refrain from placing any cookware or other items on the cooking zone while still hot.

Do not turn on the heating zones if aluminium foil or plastic items have been placed on the hob surface.

Do not go near the heating zones when these are still

hot.

If you use small electric appliances near the hob, make sure their power supply cable does not come into contact with the hot parts of the hob.

Make sure all pan handles are always pointing inwards towards the centre of the hob to prevent any accidental spills.

WARNING: Do not look at the halogen lamps in the cooking zones for long if they are present.

First use: the glue used on the hob seals may leave greasy traces on the glass surface. We recommend you wipe these off before using the appliance, with the aid of a non abrasive cleaner. During the first few hours of use, you may detect a smell of rubber, which will disappear quickly.

4

Image 4
Contents Instructions for Installation and Use Contents Introduction Advice and recommendations Installation Installation and fasteningFastening Electrical connection For example line 1 in the tableCooking zone description Description of the cooktopDifferent functions of the hob Description of the heating elementsMaintenance and care Advice on using your applianceHob care RecommendationsPage Page Genuine Parts and Accessories Repair Service and Information DeskExtended Warranties

S912E specifications

The Creda S912E is a powerful and efficient microcontroller designed for various applications, particularly in the fields of IoT and embedded systems. Leveraging the robust ARM Cortex-A7 architecture, the S912E is not only energy efficient but also capable of handling demanding processing tasks. With its versatile and scalable design, it is increasingly becoming a popular choice among developers and manufacturers.

One of the standout features of the Creda S912E is its octa-core processing capability. This configuration allows for superior multitasking and improved performance in applications requiring significant computational power. The cores can operate at speeds reaching up to 2.0 GHz, ensuring that tasks are executed swiftly and efficiently.

The S912E also boasts a highly integrated design which includes a range of built-in peripherals and interfaces. It offers support for HDMI, USB, SATA, and Ethernet, catering to various connectivity requirements. This extensive range of interfaces makes the S912E suitable for multimedia applications, smart home devices, and other connected solutions. Furthermore, its support for 4K video output enhances its usability in high-definition applications, such as streaming and gaming.

In terms of memory, the S912E supports dual-channel DDR3/LPDDR3 memory, enabling effective data handling and improving overall system performance. The microcontroller can accommodate various types of flash memory, facilitating flexible storage options and allowing developers to customize their projects according to specific needs.

One of the key strengths of the Creda S912E is its energy efficiency. Designed with a focus on low power consumption, the S912E helps in prolonging battery life in portable applications, making it ideal for IoT devices and wearable technology. Additionally, it incorporates advanced power management features that optimize resource use, further enhancing energy efficiency.

Another prominent characteristic of the S912E is its support for multiple operating systems, including Android and Linux. This flexibility allows developers to choose their preferred environment, simplifying the development process and speeding up the time-to-market for new products.

In summary, the Creda S912E stands out as a robust microcontroller offering exceptional processing power, extensive connectivity options, and energy efficiency. Its advanced features and scalability make it suitable for a wide range of applications, from consumer electronics to industrial automation, making it a valuable component in the expanding realm of embedded systems and IoT.