Creda S912E manual Maintenance and care, Advice on using your appliance, Hob care, Recommendations

Page 9

Maintenance and care

Advice on using your appliance

To get the best from your hob, it is vital that you follow a few fundamental rules during cooking and when prepar- ing food.

Use pans with a flat bottom so they adhere fully to the heating zone.

Always use pans whose diameter covers the cooking zone fully so that all the available heat can be used.

Make sure the pan base is always clean and dry, to guarantee good contact and long life for the cooking zones and pans alike.

Avoid using pans used normally on gas burners. The concentration of heat on gas burners can warp the bottom of the pan, consequently you would never obtain the desired result when using the pan on the glass ceramic hob.

Never leave a cooking zone on without a pan on it as the maximum heat level would be reached very quickly, which could damage the heating elements.

The glass ceramic hob is resistant to thermal and mechanical shocks. However, it may break due to a shock caused by a sharp object. In this case, unplug the appliance immediately and contact an authorised after-sales service centre to have it repaired.

Always keep your hob clean. Before proceeding with main- tenance operations, check that all the cooking zones are turned off and have cooled down completely.

Stainless steel frame (only on some models)

Stainless steel can stain as an effect of enduring contact with limescale in water or as an effect of highly aggres- sive detergents (containing phosphorus). We recommend you rinse and dry it thoroughly after maintenance. It is preferable to remove any water spills immediately.

Hob care

The vitroceramic glass used for the heating surface is smooth and poreless and it is also resistant to thermal shocks and to mechanical shocks under normal condi- tions of use. In order to preserve these properties, we recommend you care for your hob as follows:

for ordinary maintenance, just wipe it with a damp sponge and dry it thoroughly using paper towels.

If the hob is dirty, rub clean using a special cleaner suitable for vitroceramic glass, rinse off and dry thor- oughly.

food residue and dirt can be removed using a spe- cial scraper. Do this as soon as possible, do not wait for the hob to cool down in order to avoid incrustations. For excellent results, use a special stainless steel wool pad for vitroceramic glass cleaning soaked in soapy water.

When the hob is clean, you can apply a special product for the care and protection of the same: this type of product leaves an invisible film on the surface of the hob to protect the same against any spills and boiled-over food. It is best if you do this when the hob is lukewarm or cold.

Make sure you always rinse the hob with clean wa- ter and dry it thoroughly: otherwise the cleaning prod- ucts could become encrusted onto the hob during sub- sequent cooking.

Recommendations

Never use abrasive or corrosive substances, such as aerosol cleaners for grills and ovens, stain removers or rust removers, scouring powders and abra- sive sponges: even the delicate ones could scratch the hob surface irreversibly.

We recommend youkeep all items which could melt away from the hob, such as plastic utensils, sugar or products with a high sugar content. Should liq- uid boil over onto the hob surface, remove it immedi- ately (while the hob is still hot) using a razor blade scraper, in order to avoid damaging the surface.

Use this hob exclusively for cooking. Do not place items on the hob when the same is not in use. Do not use the hob as a work surface (by placing lids, saucepans or dishcloths on it, for example), nor as a chopping board.

Never leave aluminium wrappers, aluminium foil and plastic cookware on the hob when hot or still warm.

Do not use steam cleaners or high pressure clean- ers to clean your appliance.

Do not place metal items on the hob (such as knives, spoons, lids, etc.).

Never heat up unopened tins: they could burst.

The guarantee does not cover damage to the hob caused by incorrect use.

9

Image 9
Contents Instructions for Installation and Use Contents Introduction Advice and recommendations Installation and fastening InstallationFastening For example line 1 in the table Electrical connectionDescription of the cooktop Cooking zone descriptionDescription of the heating elements Different functions of the hobAdvice on using your appliance Maintenance and careHob care RecommendationsPage Page Repair Service and Information Desk Genuine Parts and AccessoriesExtended Warranties

S912E specifications

The Creda S912E is a powerful and efficient microcontroller designed for various applications, particularly in the fields of IoT and embedded systems. Leveraging the robust ARM Cortex-A7 architecture, the S912E is not only energy efficient but also capable of handling demanding processing tasks. With its versatile and scalable design, it is increasingly becoming a popular choice among developers and manufacturers.

One of the standout features of the Creda S912E is its octa-core processing capability. This configuration allows for superior multitasking and improved performance in applications requiring significant computational power. The cores can operate at speeds reaching up to 2.0 GHz, ensuring that tasks are executed swiftly and efficiently.

The S912E also boasts a highly integrated design which includes a range of built-in peripherals and interfaces. It offers support for HDMI, USB, SATA, and Ethernet, catering to various connectivity requirements. This extensive range of interfaces makes the S912E suitable for multimedia applications, smart home devices, and other connected solutions. Furthermore, its support for 4K video output enhances its usability in high-definition applications, such as streaming and gaming.

In terms of memory, the S912E supports dual-channel DDR3/LPDDR3 memory, enabling effective data handling and improving overall system performance. The microcontroller can accommodate various types of flash memory, facilitating flexible storage options and allowing developers to customize their projects according to specific needs.

One of the key strengths of the Creda S912E is its energy efficiency. Designed with a focus on low power consumption, the S912E helps in prolonging battery life in portable applications, making it ideal for IoT devices and wearable technology. Additionally, it incorporates advanced power management features that optimize resource use, further enhancing energy efficiency.

Another prominent characteristic of the S912E is its support for multiple operating systems, including Android and Linux. This flexibility allows developers to choose their preferred environment, simplifying the development process and speeding up the time-to-market for new products.

In summary, the Creda S912E stands out as a robust microcontroller offering exceptional processing power, extensive connectivity options, and energy efficiency. Its advanced features and scalability make it suitable for a wide range of applications, from consumer electronics to industrial automation, making it a valuable component in the expanding realm of embedded systems and IoT.