Creda S710E manual Electrical Connection

Page 9

Electrical Connection

Supply cable installation

The electrcic hobs are supplied without cable. Use a cable:

H05 VV-F 3x2.5mm2

Open the terminal box by removing the "V" screw and taking off the cover.

The wires in the mains lead are coloured in accordance with the following code:

Green & Yellow

- Earth E

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blue

- Neutral N

Brown

- Live L

Connect the wires in accordance with the following diagram

1 2 3 4 5

LN

Fix the cable in place with the "F" cable clamp, close the lid and fasten it with the "V" screw.

Connecting the supply cord to the electrical mains: The hob must be connected to the mains by a double pole mains switch, which must have a minimum 0f 3mm space between the contacts, correctly fused with a capacity appropriate to that shown on the hob Rating Plate. All electrical wiring from the consumer unit to the appliance, via the switched double pole cooker outlet, must be of an acceptable type and current rating as above.

The supply cord should conform to BS6004 conductor size 4mm2, must be positioned so that no part of it reaches a temperature of 50° C above room temperature. The electrical installation must comply with the IEE Regulations, Building Regulation & local By-Laws.

Before making the connection, make sure that:

the limiter switch (fuse) and the residual wiring can support the appliance load (see the rating plate).

the mains system is properly earthed in compliance with current regulations and provisions.

there is easy access to the socket or the double pole switch after the appliance is installed.

IMPORTANT:

If the hob is installed above a built-in oven, the electrical connection for the hob must be independent of that for the oven, both for safety reasons and to facilitate the removal of the oven for maintenance, repair etc.

V

1

2

3

4

5

 

 

 

 

F

Voltage and frequency of power supply:

240V~ 50/60Hz 5600W

9

Image 9
Contents Instructions for Installation and Use Contents Introduction Always For Your SafetyHow To Use Your Hob Know your HobElectric Hotplates Setting Practical AdviceChoice of utensils Always NeverTroubleshooting Care and CleaningInstallation of built-in hobs InstallationFastening Clamps Assembly Diagram =20mm top =30mm top FrontElectrical Connection Page Page Key Contacts

S710E specifications

The Creda S710E is a modern electric storage heater designed to provide efficient heating solutions for residential spaces. Known for its practicality and user-friendly features, the S710E is an excellent choice for homeowners looking to enhance their comfort without incurring hefty operating costs.

One of the main features of the Creda S710E is its unique storage heating functionality. This heater stores thermal energy during the night when electricity rates are lower and releases it throughout the day, allowing users to benefit from cost-efficient heating. This night-time charging system ensures that the environment remains warm and comfortable during the day without the constant need for electricity.

The S710E is equipped with an intelligent control system that enables users to manage their heating preferences effectively. A built-in programmable timer allows for precise scheduling, meaning you can set it to heat specific rooms at designated times. This level of control helps in reducing energy consumption, making it an eco-friendly choice for modern living.

In terms of design, the Creda S710E combines functionality with aesthetic appeal. Its sleek, unobtrusive form allows it to seamlessly blend into various interior styles. Additionally, the built-in safety features, including overheat protection and adjustable airflow, ensure that it operates safely and reliably in any household.

Technologically, the S710E utilizes ceramic materials which are known for their excellent heat retention properties. This ensures that once the heater reaches the desired temperature, it can maintain warmth for extended periods. The ceramic core reduces energy wastage, thus enhancing its efficiency.

Another notable characteristic of the Creda S710E is its lightweight construction, making it easy to install and relocate if needed. This flexibility is ideal for homes where room configurations may change frequently.

Overall, the Creda S710E stands out as a dependable electric storage heater that combines advanced technology, efficient energy use, and a sleek design, thus making it a desirable addition for maintaining a cozy home environment. Whether you're looking to replace an old heater or outfit a new space, the S710E delivers on all fronts, promising warmth and comfort while being easy on the wallet.