Daewoo KOC-8H4TSL owner manual Convection COOKINGwith pre-heat

Page 13

CONVECTION COOKING(with pre-heat)

For convection cooking, it is recommended that you preheat the oven to the appropriate temperature before placing the food in the oven. The maximum preheating time is 30 minutes. If the cooking is not started immediately after preheating, the convection indicator will continue to flash and the preheated oven temperature will be displayed.

It is maintained for 15 minutes; it is then switched off automatically.

 

▲

Stop / clear

Start /

 

 

speedy cook

 

▲

Stop / clear

Start /

 

 

speedy cook

 

▲

1.Press Convection button once. CONVECTION indicator lights. “110C” shows in display.

2.Select the convection cooking temperature by pressing the Convection button again until the corresponding temperature is displayed.

Temperature sequence

110C → 120C → 130C → 140C → 150C → 160C → 170C → 180C → 190C → 200C → 210C → 220C → 230C → 240C → 250C →

3.Press START/SPEEDY COOK button. CONVECTION indicator blinks. Temperature of preheating and “PrE-”blink altematively in the display.

The oven will now preheat. When oven is preheated the oven will beep and the preheated oven temperature will appear in the display.

Then open the door and place your food in the oven. Oven temperature and shows in display.

4.Turn the dial knob to set the cooking time.

For a cooking time of 11 minutes, turn the dial knob to the right to set 11:00.(up to 60 minutes)

“11:00” shows in display.

5.Press START/SPEEDY COOK button.

The oven light comes on and the turntable starts rotating. Cooking starts and the time in the display will count down.

Note: You can check the setting temperature while preheating is in progress by pressing the Convection button.

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Microwave CONVECTION/GRILL Oven Table of Contents Child Lock Installation and Earthing InstructionsPage General Use Eggs Which Utensil can be Used in the OVEN?Piercing LidsMicrowave Cook Control PanelGlass Turntable Metal Tray Metal rack AccessoriesExample To set Setting the ClockTo set power save mode Child Lock and Power Save ModeTo set child lock Microwave Cooking Power level table Percentage OutputPress START/SPEEDY Cook button Suggested use Cookware Grill CookingConvection COOKINGwith pre-heat Convection COOKINGtraditional cooking For example C-HI Combination Cooking Microwave + Convection + Upper GrillTime Defrost Weight DefrostAuto Cook To Stop the Oven While the Oven is Operating Speedy CookAbnormal Message ArcingGeneral Guide Lines Keep the Oven Clean Problem Before Calling for ServiceSolution Questions and Answers Disposal of Used Electrical Electronic Equipment Specifications

KOC-8H4TSL specifications

The Daewoo KOC-8H4TSL is an advanced and highly regarded construction equipment piece designed primarily for compact excavating tasks. This model has gained popularity among construction professionals due to its blend of power, efficiency, and versatility, making it suitable for various applications.

One of the standout features of the KOC-8H4TSL is its compact size. With its reduced overall dimensions, it can operate in tight spaces where larger machinery would struggle. This feature allows for greater maneuverability on congested job sites while still delivering significant digging power. The model is equipped with a robust hydraulic system that provides exceptional lifting and digging capabilities, allowing operators to handle heavy loads with ease.

The engine powering the KOC-8H4TSL is a high-performance unit that ensures ample power while maintaining fuel efficiency. The engine is designed to meet stringent emission regulations, making it an environmentally friendly choice for contractors looking to minimize their carbon footprint. Moreover, its low noise levels contribute to a more pleasant working environment, which is particularly important in urban areas.

The KOC-8H4TSL comes with a hydraulic quick coupler feature that enables operators to quickly switch between different attachments, such as buckets, augers, and hammers. This versatility means that one machine can effectively perform multiple tasks, significantly increasing productivity. Additionally, the excavator's reach and digging depth capabilities are noteworthy, allowing it to tackle a variety of excavation tasks with precision.

Another highlight of this excavator is its operator-friendly design. The spacious and ergonomic cab ensures maximum comfort during operation, which is vital for long hours on the job. It is equipped with modern controls and a clear display panel, allowing for intuitive operation and minimizing the learning curve for new users.

Furthermore, the KOC-8H4TSL incorporates advanced safety features such as an automatic shut-off system and enhanced visibility through strategically placed windows. These safety measures ensure that operators can work confidently and efficiently, reducing the risk of accidents on-site.

In conclusion, the Daewoo KOC-8H4TSL is a reliable and efficient compact excavator that combines power, versatility, and user-friendly design. Its robust features make it a valuable addition to any construction fleet, enabling operators to perform various tasks efficiently while ensuring safety and comfort. Whether for landscaping, utility installation, or general excavation, the KOC-8H4TSL stands out as an exceptional choice.
Top Page Image Contents