Dacor EF42NBSS Dispensing Models, Clean the Ice Storage Bin, To Turn the Ice Maker On/Off

Page 11

Refrigerator Operation

To Remove and Replace the Ice Bin (non-dispensing models):

1. Flip up the ice maker cover.

A

B

A. Ice maker cover

B. Ice bin

2.Lift the wire shutoff arm so it clicks into the off (up) position. Ice can still be dispensed, but no more can be made.

3.Lift up the front of the storage bin and pull the ice bin forward.

4.Replace the bin by pushing it in all the way or the dispenser will not work. Push the wire shutoff arm down to the on position to restart ice production. Make sure the door is closed tightly.

Dispensing Models

To Turn the Ice Maker On/Off:

1.The On/Off switch is located on the top right side of the freezer compartment.

Ice Maker

2.To turn the ice maker on, slide the control to the ON (left) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will remain in the ON (left) position.

3.To manually turn the ice maker off, slide the control to the OFF (right) position.

To Remove and Replace the Ice Storage Bin (dispensing models):

1.Hold the base of the storage bin (located on the back of the freezer door) with both hands and press the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The sensor cover (“flipper door”) on the left wall of the freezer stops the ice maker from producing ice if the door is open or the storage bin is removed.

2.Replace the storage bin on the door and push down to make sure it is securely in place.

Clean the Ice Storage Bin

1.Empty the ice container. Use warm water to melt the ice if necessary.

NOTE: Do not use anything sharp to break up the ice in the bin or bucket. This can cause damage to the ice container and the dispenser mechanism.

2.Wash ice bin with a mild detergent, rinse well and dry thoroughly. Do not use harsh or abrasive cleaners or solvents.

IMPORTANT:

„„ Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container. Discard the first three batches of ice produced to avoid impurities that may be flushed out of the system.

„„ The quality of your ice will be only as good as the quality of the water supplied to your ice maker.

„„ Avoid connecting the ice maker to a softened water supply.

„„ Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

„„ It is normal for the ice cubes to be attached at the corners. „„ They will break apart easily.

„„ For non-dispensing models, do not force the ice maker wire shutoff arm up or down.

„„ Do not store anything on top of the ice maker or in the ice storage bin/bucket.

9

Image 11
Contents USE and Care Manual Inch and 48 Inch BUILT-INREFRIGERATORS Dacor, all rights reserved Proper Disposal of Your Refrigerator Important Safety InstructionsModel Identification Important InformationRefrigerator Operation Clean Before UsingTurning the Main Power Switch On/Off Before UseReverse Osmosis Water Supply Water Supply RequirementsWater System Preparation Water PressureEnsuring Proper Air Circulation Setting the ControlsOver Temperature Indicator Light Normal Operating SoundsMax Cool Setting the Temperature ScaleAdjusting the Temperature Setting Water Filter MonitorWater and Ice Dispensers AlarmsIce Maker and Storage Bin To Turn the Ice Maker On/Off Clean the Ice Storage BinDispensing Models To Remove and Replace the Ice Bin non-dispensing modelsCrispers and Covers Refrigerator StorageShelves and Shelf Frames Ingredient Care CenterFreezer Storage Frozen Food Storage Information Power InterruptionsVacation Care Freezer BasketsChanging the Light Bulbs Care and CleaningCleaning Flushing the Water System After Replacing Filter Using the Dispenser Without the Water FilterReplacing the Water Filter Refrigerator will not operate TroubleshootingIce maker is not producing ice or not enough ice Ice storage bin is difficult to remove Application Guidelines/Water Supply Parameters Product Data SheetsProduct Maintenance Warranty and ServicePage

EF42NBSS, EF48DBSS, IF42NBOL, IF48DBOL, EF48NBSS specifications

Dacor, a renowned name in luxury kitchen appliances, has made a significant impact with its impressive lineup of refrigeration products, including the IF48NBOL, EF48NBSS, IF48DBOL, IF42NBOL, and EF48DBSS models. Each of these refrigerators stands out for its combination of innovative technologies, modern aesthetics, and unparalleled performance, catering to both the practical needs and design preferences of today’s homeowners.

The Dacor IF48NBOL and IF48DBOL models are built with an emphasis on seamless integration. Their panel-ready design allows for customized front panels, enabling these appliances to blend effortlessly into any kitchen decor. Equipped with advanced preservation technology, these refrigerators utilize Dacor's Twin Cooling Plus system. This separates airflow between the refrigerator and freezer compartments, maintaining the ideal humidity levels that help keep food fresh for longer periods.

In contrast, the EF48NBSS and EF48DBSS models feature a stainless-steel finish that adds a touch of elegance and modern style to any kitchen. These freestanding refrigerators boast a robust and spacious design with an impressive capacity, perfect for storing a large number of groceries. The intelligent Touch Control panel allows users to conveniently adjust settings and monitor temperatures, ensuring optimal food preservation.

All of these Dacor models come equipped with advanced filtration systems, which help eliminate contaminants and unwanted odors, providing fresh-tasting water and ice. Their Energy Star certification highlights Dacor's commitment to sustainability, ensuring reduced energy consumption without compromising performance.

Another standout characteristic is the FlexZone Drawer found in many of these models, allowing for customizable temperature settings tailored to specific food items. This feature promotes versatility, accommodating anything from meats to produce, enhancing the overall user experience.

Finally, the sophisticated design is complemented by soft-close drawers, adjustable bins, and strategically placed LED lighting, providing easy access and visibility to all stored items. The combination of aesthetic appeal, innovative technology, and user-friendly features makes the Dacor IF48NBOL, EF48NBSS, IF48DBOL, IF42NBOL, and EF48DBSS refrigeration models a smart choice for those who value style and functionality in their kitchens.