Installation Requirements
Door Panels and Cabinetry Clearance - IF42/IF48 Series Models
The custom door panels and adjacent cabinetry for models series IF42 and IF48 must be designed so that there is sufficient clearance for the doors to swing open. If the refrigerator is to be installed close to the wall, see Door Swing 90° on facing page.
Door Swing 110°
Actual Size
Refrigerator to
Cabinetry Clearance
110˚ Door
Stop Position
NOTE: For IF Series models, rout the hinge side of the custom door panels to a radius that is equal to at least half the thickness of the panel if a 130° door swing is desired. See Adjust Doors.
| Refrigerator |
| Side Trim |
| 11/2" |
| (3.8 cm) |
| 11/4" |
| (3.2 cm) |
| 1" |
| (2.5 cm) |
| Cabinetry |
| 1/4" (6.4 mm) |
Hinge | 1/2" (1.3 cm) |
| 3/4" (1.9 cm) |
| 1" (2.5 cm) |
1/2"
| (1.3 cm) |
| |||
|
|
| 3/4" |
| |
|
|
| (1.9 cm) |
| |
|
|
|
| 1" | |
|
|
|
| (2.5 cm) | |
|
| Overlay | 11/4" | ||
| Backer | (3.2 cm) | |||
|
|
| 11/2" | ||
Door |
|
| Panel | ||
Panel | (3.8 cm) | ||||
|
| ||||
|
|
| |||
Spacer Panel
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.
8