Crosley 241559900 manual Door Removal and Reversal Instructions

Page 6

Door Removal and Reversal Instructions

DOOR REMOVAL AND REVERSAL INSTRUCTIONS:

NOTE: If you have stainless steel doors -- go to the Removing Stainless

Steel Doors and Handles Section on page 9.

NOTE: The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be performed by a qualified person.

IMPORTANT: Before you begin, turn the refrigerator temperature control to “0” and remove the electrical power cord from the wall outlet. Remove any food from door shelves.

1.Remove toe grille and top hinge cover.

2.Remove top hinge with 3/8” hex driver and lift freezer door off of center hinge pin. Set door aside.

3.Unscrew center hinge pin using adjustable wrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge and shim to slide out. Tighten screws.

6. Loosen two outside screws on opposite side of refrigerator, remove inside screw and install center hinge.

7. Remove two screws on bottom hinge with 3/8” socket wrench.

8. Install bottom hinge on opposite side with the two screws removed from step 7.

9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole in hinge and tighten with adjustable wrench.

10.Reverse door handles (see instructions on next page).

11.Move freezer and refrigerator door stops to opposite side. Before

starting screws, use an awl to puncture the foam.

12. Position refrigerator door onto bottom hinge pin and screw center hinge pin through center hinge into top of door. Close refrigerator door to help align hinge hole.

13. Tighten center hinge pin with adjustable wrench.

14. Remove cabinet and hinge hole plugs and move to opposite side.

15. Lower freezer door onto center hinge pin.

16.Close freezer door. Have an assistant lift up on opposite side of door while tightening screws to install top hinge.

17.Replace toe grille and top hinge cover.

18.Plug in electrical power cord and turn refrigerator temperature control to center position. Adjust setting as necessary.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 241559900 Welcome & Congratulations Please Read and Save These InstructionsFor Product Information Contact Child Safety Important Safety InstructionsFor Your Safety Proper Disposal of Your Refrigerator or FreezerLocation InstallationInstallation Door OpeningBefore Installing The Water Supply Line,You Will Need To Connect Water Supply Line To Ice Maker Inlet ValveDoor Removal and Reversal Instructions Door Removal and Reversal InstructionsTo Remove Freezer Handle To Attach Freezer HandleTo Attach Refrigerator Handle To Remove TrimTo Remove Refrigerator Handle To Attach TrimRemoving Stainless Steel Doors and Handles To Remove DoorsFeatures At a Glance Temperature Controls Refrigerator & Freezer Controls Temperature AdjustmentCool Down Period Shelf Adjustment Looking InsideTall Bottle Retainer Some Models Adjustable Door BinsDoor Storage Special Item Rack Some ModelsHumidity Control Some Models Crispers Some ModelsTurning Your ICE Maker OFF Ice ServiceTurning Your ICE Maker on ICE Maker TipsFood Storage & Energy Saving Ideas Food Storage IdeasEnergy Saving Ideas Drain Pan Nonremovable Normal Operating Sounds & SightsUnderstanding the Sounds YOU MAY Hear Condenser Coils Fan-cooled models onlyCare & Cleaning Care & Cleaning ChartStatic Condenser Some Models Replacing the Freezer Light BulbWarranty Information Refrigerator WarrantySatisfactory Refrigerator temperature too cold Freezer temperature too coldRefrigerator temperature is Freezer temperature is
Top Page Image Contents