Crosley 241559900 manual To Remove Freezer Handle, To Attach Freezer Handle

Page 7

Door Removal and Reversal Instructions (continued)

NOTE: Some models have “pocket” handles, which are recessed into the sides of the door. On these models, only the hinges will need to be reversed.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2. Remove short trim piece by sliding trim straight up and off of handle bracket.

3. Remove screw attaching top of handle to door.

4. Magnetic Nameplate Models: Gently pry magnetic nameplate frame from

door. Remove nameplate from its frame, turn frame upside down and install in old handle holes. Insert magnetic nameplate into frame. Self-Adhesive Nameplate Models: Gently peel off nameplate from door and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Reinstall handle on opposite side, using same hole as nameplate.

2. Attach handle to bottom of door.

3. Slide trim piece straight down onto handle bracket.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2. Swing bottom of handle away from the door and slide handle straight up and off of dovetail button.

3. Remove screw and dovetail button and install on other side, using the same holes as nameplate.

4. Magnetic Nameplate Models: Use putty knife to gently pry magnetic nameplate frame from door. Remove nameplate from its frame, turn frame upside down and install in old handle holes. Insert magnetic nameplate into frame.

Self-Adhesive Nameplate Models: Use putty knife to gently peel off name plate from door and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Start with handle offset away from door. Place top of handle over dovetail button, swing handle into an upright position and pull downward, locking it into place.

2. Secure bottom of handle with two screws removed earlier.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1.Remove two screws attaching handle to bottom of freezer door.

2.Remove button plug using edge of putty knife.

3. Remove screw on side of freezer door and remove handle.

TO ATTACH FREEZER HANDLE:

1. Secure side of handle to door and replace button plug.

2. Secure handle to bottom of door.

NOTE: To remove freezer handle, refer to figure 3 on page 9.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 241559900 Please Read and Save These Instructions Welcome & CongratulationsFor Product Information Contact Proper Disposal of Your Refrigerator or Freezer Important Safety InstructionsFor Your Safety Child SafetyDoor Opening InstallationInstallation LocationTo Connect Water Supply Line To Ice Maker Inlet Valve Before Installing The Water Supply Line,You Will NeedDoor Removal and Reversal Instructions Door Removal and Reversal InstructionsTo Attach Freezer Handle To Remove Freezer HandleTo Attach Trim To Remove TrimTo Remove Refrigerator Handle To Attach Refrigerator HandleTo Remove Doors Removing Stainless Steel Doors and HandlesFeatures At a Glance Refrigerator & Freezer Controls Temperature Adjustment Temperature ControlsCool Down Period Looking Inside Shelf AdjustmentSpecial Item Rack Some Models Adjustable Door BinsDoor Storage Tall Bottle Retainer Some ModelsCrispers Some Models Humidity Control Some ModelsICE Maker Tips Ice ServiceTurning Your ICE Maker on Turning Your ICE Maker OFFFood Storage Ideas Food Storage & Energy Saving IdeasEnergy Saving Ideas Condenser Coils Fan-cooled models only Normal Operating Sounds & SightsUnderstanding the Sounds YOU MAY Hear Drain Pan NonremovableCare & Cleaning Chart Care & CleaningReplacing the Freezer Light Bulb Static Condenser Some ModelsRefrigerator Warranty Warranty InformationFreezer temperature is Freezer temperature too coldRefrigerator temperature is Satisfactory Refrigerator temperature too cold
Top Page Image Contents