![](/images/new-backgrounds/1083136/8313623x1.webp)
Trouble Shooting
Occasionally, a problem is minor and a service call may not be necessary - use this trouble shooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service
depot or Danby's Toll Free Number
Problem | Possible Cause What to do |
No Power. | A fuse in your home may |
| be blown or the circuit |
| breaker tripped |
Replace fuse or reset circuit breaker.
Power surge
Plug not fully inserted into wall outlet
Unplug the Beverage Center, wait a few seconds and then plug it back in
Make sure the
Cabinet Temperature | Temperature setting | Verify the temperature control setting |
too High |
| Adjust if neccessary |
| Door(s) not shut properly | Ensure that the doors are fully closed |
| or opened excessively | and that the gaskets are sealing |
|
| against the cabinet. Open the doors |
|
| only as needed and for short periods |
|
| of time |
| Exhaust vent is obstructed | Verify there is nothing blocking the |
|
| front mounted exhausting vent |
| Recently added a large | Limit the quantity of warm bottles |
| quantity of warm bottles | being introduced to the cabinet. |
| to the cabinet |
|
|
|
|
Condensation on the | High humidity conditions | The condensation will subside once |
cabinet and/or doors | in the home | humidity conditions return to normal |
| Door(s) not shut properly | Ensure that the doors are fully closed |
| or opened excessively | and that the gaskets are sealing |
|
| against the cabinets. Open the doors |
|
| only as needed and for short periods |
|
| of time |
11