Creda CUL16G manual Product Safety, Installation

Page 3

PRODUCT SAFETY

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi- nation of radio interference (EC directive 87/308 - 02.06.89).

1.This appliance must not be installed outdoors - not even in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.

2.It must only be used by adults and exclusively to refriger- ate and freeze foodstuffs, following the instructions for use contained in this manual.

3.Do not ever touch or handle the appliance with bare feet or with wet hands or feet.

4.It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is installed between cabinets, make sure that the cord is not bent or dangerously pinched or compressed.

5.Never pull on the cord or the refrigerator to remove the plug from the wall socket - this is very dangerous.

6.Never touch the cooling components within the appliance, especially with wet hands because this could result in injury.

7.Never put ice cubes just removed from the freezer into your mouth because they could stick to your mouth and cause burns.

8.Never clean the appliance or perform maintenance without first disconnecting it from the electrical mains. Turning the

thermostat knob to the setting does not suffice to break all electrical contact with the mains.

9.Before having your old refrigerator picked up for disposal, remove or make inoperable any locking devices to prevent children who might play in or around the appliance from be- ing locked inside.

10.Before calling for service/assistance in the case of mal- function, consult the chapter entitled “Troubleshooting" to de- termine whether it is possible to eliminate the problem. Do not try to repair the problem by trying to access the internal components of the appliance.

11.If damaged, the power supply cord on this appliance must necessarily be replaced by our service centre because special tools are required for replacement.

12.Do not use electric appliances inside the compartment for food storage, if these are not those recommended by the manufacturer.

13.At the end of the functional life of your appliance – containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit – the latter should made safe before being sent to the dump. For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.

INSTALLATION

To ensure that the appliance operates properly and to reduce energy consumption, it is important that the ap- pliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, therefore, need to be ventilated properly. Avoid placing refrigerator in direct sunlight, or next to an electric stove or similar appliance. Areas not adequately ventilated are not suitable for this appliance.

During installation, make sure not to cover or obstruct the grates that allow for proper ventilation of the appliance.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, hob or the like.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure that the voltage indicated on the rating plate, located at the bottom left near the fruit and vegetable crisper, corresponds

to the mains voltage in your home and that the socket is fitted with a standard earthing wire in accordance with safety stand- ards for 46/90 systems. If the socket is not fitted with an earthing wire, the manufacturer will not be held liable for any damages and/or injuries arising out of the use of the appliance. Do not use multiple sockets or adapters.

Position the appliance in such a way that you can access the socket where it is plugged in.

Insufficient power?

The electrical socket must be able to handle the maximum power load of the appliance, which is indicated on the rating plate located at the bottom left next to the vegetable crisper.

Before making the electrical connection ...

After the appliance has been delivered, place it in the vertical upright position and wait at least 3 hours before inserting the plug into the socket in order to ensure that it functions properly.

3

GB

Image 3
Contents Instructions for Installation and Use Contents Installation Product SafetyChanging the plug Removing the plug Replacement fuse coversElectrical Connection Replacing fuse coversGET to Know Your Appliance Temperature controlGetting Your Appliance Ready for USE What Not to Store in the RefrigeratorStoring Food in the Refrigerator Energy Saving Tips Defrosting Cleaning and Special MaintenanceHow to Defrost the Refrigerator Caring for Your ApplianceTroubleshooting Page Page 195.037.027.00 April 2003 Part no. FP192

CUL16G specifications

The Creda CUL16G is a popular and compact electric cooker designed to cater to the needs of modern kitchens. This appliance combines functionality, efficiency, and stylish design, making it a suitable choice for both small apartments and larger homes.

One of the standout features of the Creda CUL16G is its compact size. Designed with space constraints in mind, the cooker measures just 50cm in width, making it perfect for tight kitchen layouts without compromising cooking performance. This appliance is especially favored by those who seek versatility in their cooking space, as it offers multiple cooking options in a small footprint.

The cooker's main cooking area features four ceramic hobs that provide quick and efficient heat. These hobs are known for their easy cleaning surfaces and speedy heating capabilities, allowing users to prepare meals in less time. Moreover, the hob controls are ergonomically placed at the front, ensuring ease of access and visibility while cooking.

Another notable characteristic is the built-in oven, which includes a spacious interior that can accommodate various dishes simultaneously. The oven operates on conventional heating technology, providing users with even heat distribution for consistent cooking results. The interior is also designed with a smooth enamel finish that simplifies the cleaning process, minimizing the time spent on maintenance.

The Creda CUL16G incorporates a grill option, perfect for those who enjoy crispy textures on meats or vegetables. This feature provides additional cooking versatility, allowing users to prepare a wider range of dishes. The oven also features multiple shelf positions, enabling users to adjust the height of their cooking trays based on the size of their meals.

Safety is also a key consideration in the design of the Creda CUL16G. The cooker is equipped with an integrated safety cut-out feature that ensures the appliance turns off automatically in case of overheating. This safety technology adds peace of mind for users, especially in households with children.

In terms of energy efficiency, the Creda CUL16G is designed to consume less power compared to traditional cookers, which can lead to reduced utility bills over time. This emphasis on energy-saving features makes it both an environmentally friendly and budget-conscious choice for consumers.

In summary, the Creda CUL16G stands out for its compact size, versatile cooking options, safety features, and energy efficiency. With its combination of practical design and modern technology, this electric cooker is an excellent addition to any kitchen, catering perfectly to both novice and experienced home cooks alike.