Safety Instructions, Installation, Operation

Safety Instructions

ATTENTION

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical shock by providing an escape wire for the electrical current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

DO NOT USE AN EXTENSION CORD

Use an exclusive wall outlet. Do not connect your refrigerator to extension cords or together with any other appliance in the same wall outlet. Do not splice the cord.

IMPORTANT WARNING

An empty refrigerator is a very dangerous attraction to children. Remove either the gasket, latches, lids or doors from unused appliances, or take some other action that will guarantee it harmless.

DON’T WAIT! DO IT NOW!

Installation

Remove exterior and interior packings, wipe the outside thoroughly with a soft dry cloth and the inside with a wet, lukewarm cloth. Avoid placing the cabinet in a narrow recess or near any heat source, direct sunlight, or moisture. Let air circulate freely around the cabinet. Keep the rear of the refrigerator 5 inches away from the wall.

Location

1.Select a place with a strong, level floor.

2.Allow 5 inches of space between the back of the refrigerator and any adjacent wall.

3.Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will cause higher electricity consumption.

4.Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the evaporator, and your refrigerator will have to be defrosted more frequently.

Operation

To avoid vibration, the cabinet must be set level. This is accomplished by adjusting the (2) front leveling legs located under the refrigerator cabinet. To start the refrigerator, turn the temperature control (OFF-MAX) to the position corresponding to the desired cooling.

OFF	= No Cooling	4 = Medium Cooling
1	= Minimum Cooling	MAX = Maximum Cooling

The refrigerator temperature will vary depending on the quantity of the food stored and on the frequency with which the door is opened.

Defrosting Instructions

This refrigerator is inclusive of a cycle defrost system.

The refrigerator has a cold plate located in behind the back wall of the refrigerator cabinet. Ice build-up on the back wall during compressor operation is normal. When the compressor has cycled off, accumulated ice will defrost automatically. Defrost water will collect inside the drain trough pass through the drain outlet located at the bottom of the cabinet and funnel into a drain pan situated above the compressor. The water will then evaporate from this tray from the heat of the compressor.

REMINDER: Keep the drain outlet opening clear of any food particles or other impediments. This will ensure the water can funnel to the drain pan without obstruction. Failure to keep this outlet clean may result in water overflowing the trough, causing water to accumulate at the bottom of the refrigerator, eventually leaking onto your floor. Please wipe this trough and drain outlet with a soft cloth as required.

DAR1102W specifications

The Danby DAR1102W is a compact refrigerator designed to cater to the needs of those living in smaller spaces or requiring additional refrigeration options. With its sleek and modern white design, this refrigerator not only enhances the aesthetic of any room but also provides efficient storage solutions.

One of the standout features of the Danby DAR1102W is its impressive capacity, offering 11 cubic feet of storage space. This ample size allows users to store a significant amount of food and beverages without taking up too much space in the kitchen, dorm, or office. The interior is cleverly designed with adjustable shelves, allowing for customizable storage configurations to accommodate taller items or bulky containers.

The Danby DAR1102W uses energy-efficient technology, making it an environmentally friendly choice. The unit has received Energy Star certification, which means it meets strict energy efficiency guidelines set by the Environmental Protection Agency. This not only helps reduce electricity costs but also minimizes the refrigerator's overall carbon footprint.

Another notable characteristic of the Danby DAR1102W is its reversible door feature. This allows for flexibility in placement, enabling users to adapt the refrigerator's positioning to fit their available space. Whether it's in a tight corner or between cabinets, the reversible door ensures that accessing your items is convenient.

The unit also boasts an adjustable thermostat, providing users with complete control over the internal temperature. This feature aids in maintaining the freshness of stored items, allowing for optimal preservation of perishable goods. Additionally, the built-in freezer section offers the convenience of frozen food storage without the need for a separate unit.

The fridge is equipped with integrated can and bottle storage in the door, maximizing storage efficiency while keeping beverages easily accessible. The interior lighting ensures that users can quickly view their contents, even in low-light conditions.

With its user-friendly features, modern design, and energy efficiency, the Danby DAR1102W stands out as a reliable and versatile choice for consumers looking for a compact refrigerator that doesn’t compromise on functionality or style. Whether it's for a small apartment, a college dorm, or an office space, this refrigerator meets the essentials of modern living seamlessly.