Connection Instructions
Cable TV Setup
-After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
-For further information regarding cable TV service, contact your local cable TV service provider(s).
Connection Option 1
1.Select 3 or 4 with channel switch on cable box.
2.Tune the TV channel to the same selected output channel on cable box.
3.Select channels at the cable box or with the cable box remote control.
Connection Option 2
1.Connect the audio and video cables from the Cable Box's output jacks to the TV input jacks, as shown in the figure.When connecting the TV to a Cable Box, match
the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
2.Select the input source by using the INPUT button on the remote control.
3.Select your desired channel with the remote control for cable box.
|
| ATN IN |
| Pr |
|
COMPONENT IN | PbY | |
|
| IN |
|
| |
|
| |
|
| VIDEO |
External Component Source Setup
How to connect
Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equip- ment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
How to use
1.Select the input source by using the INPUT button on the remote control.
2.Operate the corresponding external equi- pment. Refer to external equipment ope- rating guide.
