Dometic NDR1292-S dimensions GAS Equipment Assembly, Clear blue color Lof flame

Page 13

GAS EQUIPMENT ASSEMBLY

SOI FNOID VALVE

BURNER MOUNTING

FIG. 12

BVRNER /SPARK ELECTRODE

The correct operating pressure is 11 inches of water column. The correct place to take the LP gas pres- sure is at the test port just ahead of the burner jet. (See FIG. 12).

Inspect the flue baffle. It should be reasonably clean and free of soot. Heavy soot formation indicates im- proper functioning of the burner. The flue and burner both require cleaning in the following manner:

1Unplug the refrigerator power cord from the 120 volt AC outlet. (See FIG. 3).

2Disconnect or shut off the 12 volt power to the refrig- erator.

Turn manual shutoff valve to OFF. (See FIG. 1). Removecoverfrom the burner housing. (See FIG. 1). Disconnect the wire from the high voltage electrode. Remove the burner mounting screws and remove the burner assembly. (See FIG. 12).

Remove the wire and the flue baffle from the top of flue tube. Clean the flue from the top using a flue brush. Blowing compressed air into the flue will not properly clean soot and scale out of the flue tube. Replace the flue baffle.

Clean burner tube with a brush. Blow out burner with compressed air.

Before removing burner jet, clean burner area of soot and scale that fell out of flue tube. Remove the burner jet. Soak the jet in wood alcohol and blow it out with compressed air. Re-install and tighten burner jet.

NOTE: The color of the flame shall be clear blue over the slots of the burner. (See FIG. 13).

Clear blue color

Lof flame

FIG. 13

Shown in open position

PRESSURE TEST PORT

00 NOT use a wire or pin when cleaning the burner jet as damage can occur to the precision opening. This can cause damage to the refrigerator or create a fire hazard.

10.Reinstall burner, being careful that the end of the burner fits into the slot on the burner bracket. Check to make sure slots are centered under the flue tube and the thermocouple is positioned properly (tip of thermocouple extends over ho slots of burner).

11.Be sure to reconnect the wire to high voltage elec- trode. Check the electrode for proper location and gap. (See FIG. 14).

FIG. 14

Electrode

Burner tube

12.Turn on manual gas shutoff valve and check all fit- tings for leaks.

13.Connect 120 volt power cord to the outlet and re- connect or turn on the 12 volt DC power.

14.Check LP gas safety shutoff. See page 6.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Refrigerator for LP-GAS and Electric Operation For Your SafetyAvis ReparkPage Refrigerator control panel Ventilation General InstructionGAS Connection Electrical ConnectionTwo screws installed through the front base Installing Refrigerator in EnclosureVolts DC Connection Securing the RefrigeratorTwo screws installed in the top frame Testing LP GAS Safety ShutoffTwo scw.vs installed in the rear base Drain water hoseMethods of Installation Certified InstallationLower Vent Cutout Ventilation Heights Clearances Operation Importance of Leveling a RefrigeratorDisplaypanel Start UP Instructions Thermostat GAS Mode AESlAUTO ModeEFG Limp Mode of Operation Description of Operating ModesHOW to USE the Refrigerator Electric Equipment Clear blue color Lof flame GAS Equipment AssemblyCertified Vent System Kits TroubleshootingRefrigerator Does Not Cool Properly Spare PartsPositioning of shelves MO-F0

NDR1292-S specifications

The Dometic NDR1292-S is a reliable and versatile refrigerator designed for those who enjoy the outdoor lifestyle, whether camping, traveling in a caravan, or spending weekends at the cabin. This absorption fridge combines efficiency with advanced technology to ensure that food and beverages remain perfectly chilled, no matter where your adventures take you.

One of the standout features of the Dometic NDR1292-S is its impressive cooling capacity. With a total gross volume of approximately 96 liters, it provides ample storage space for perishable items, drinks, and other essentials. The refrigerator compartment is designed to keep your food fresh at selected temperatures, while the separate freezer compartment allows for long-term storage of frozen goods. This dual-zone design is particularly beneficial for those who wish to maintain a variety of food options while on the road.

The NDR1292-S utilizes absorption refrigeration technology, which allows it to operate quietly and efficiently, making it an excellent choice for those who prefer a peaceful environment. This technology allows the fridge to run on multiple power sources: 12V from the vehicle’s battery, 230V AC mains power, or gas. Such versatility makes it suitable for various situations, from driving across the country to living off-grid. This system also ensures minimal energy consumption, enhancing the overall efficiency of the unit.

The features of the Dometic NDR1292-S extend beyond cooling. The fridge is designed with user-friendly controls, making it easy to set and adjust the temperature according to your preferences. It also includes an adjustable shelving system, maximizing the use of available space and allowing for customizable organization of food items.

Another characteristic that sets the Dometic NDR1292-S apart is its robust design, built to withstand the rigors of travel. The exterior is constructed from durable materials that resist wear and tear, while the refrigerator's insulation is designed to maintain internal temperatures effectively, even in warm environments.

In summary, the Dometic NDR1292-S is a powerful and efficient refrigeration solution, offering generous storage capacity, flexible power options, and smart design features. Perfect for adventure enthusiasts and outdoor lovers, it ensures that users can enjoy fresh food and cold drinks wherever they may roam. With its combination of reliability, efficiency, and user-friendly design, the Dometic NDR1292-S stands out as a top choice for portable refrigeration needs.
Top Page Image Contents