Dometic RMD 8551, RMD 8505, RMD 8501 Exhaust duct system, Installing L205 without mosquito net

Installation

4.3.3Installing L205 (without mosquito net)

To install the ventilation grille, cut a rectangle width 451 mm x height 156 mm, in the outer wall of the vehicle (for position of the cuts, see Fig. 11,12).

1

Seal the mounting frame making it waterproof (does not apply for mounting frames with integral seal).

Fig. 21

2

Insert frame and screw into position.

Fig. 22

3

Insert ventilation grille.

Fig. 23

4

Lock ventilation grille.

Fig. 24

5

Insert winter cover.

Fig. 25

4.3Exhaust duct system

The exhaust gas duct system must be made in such a manner as to achieve a complete extrac- tion of combustion products to the outside of living space. The flue gas is vented directly through the upper grille. Do not use any kind of aluminium flue pipe to lead the flue gas out.

The T-piece (Fig. 26) must be trented towards the outer wall.

Fig. 26

CAUTION!

An installation other than described will reduce the cooling capacity and jeopardise the manufacturer's warranty/product liabi- lity.

14