QSC Audio WL2102-w, WL Small Grid, AF2102-LA TRI AMP/BI AMP Switch, MF Unshaded Select Switch

Page 4

TRI AMP/BI AMP Switch

TRI AMP: Shading network is NOT applied (shading must be provided by upstream signal processing). Connect the full-range input signal to pins 1+ and 1-, connect the shaded (processed) signal to pins 2+ and

2-. To flip shaded transducer location, use the MF (UNSHADED) SELECT switch or alter signal processing. Default MF (UNSHADED) SELECT switch position for three way mode is position A; if put in position B, connections (Table 1) to LF transducers A and B are interchanged.

BI AMP: The “full-range” LF input is applied to pins 1+ and 1- and the -6 dB per octave shading network is applied to one of the LF transducers using the MF (UNSHADED) SELECT switch.

MF (UNSHADED) SELECT Switch

The WideLine-10 is a 3-way design (shaded, non-shaded and high- frequency) with shading provided by a passive network in BI AMP mode or upstream signal processing (DSP) in TRI AMP mode. This allows switch position selection for use as either “house left” or “house right”, without the need to invert boxes.

BI AMP: The shading switch allows either low-frequency transducer to be selected as the shaded unit (bass only) by inserting a -6 dB per octave network. The switch handle points to the side of the unshaded (full-range) low-frequency transducer.

TRI AMP: The internal -6 dB per octave network is NOT applied to either LF transducer. Shading is accomplished with signal processing. The switch handle points to the side of the non-shaded (full-range)

TRI AMP

BI AMP

A

B

MF (UNSHADED)

SELECT

MF (UNSHADED) SELECT Switch: BI AMP Mode

Pins 1+, 1-

-6dB per octave

LF Transducer A

LF Transducer B

Pins 2+, 2- : not used

Pins 3+, 3- : not used

Pins 4+, 4-

HF Transducer

MF (UNSHADED) SELECT Switch: TRI AMP Mode

low-frequency transducer ONLY IF the full-range signal is applied to pins 1+ and 1- and the shaded signal to pins 2+ and 2-. Default position for TRI AMP mode is position A; if put in position B, connections to LF transducers A and B are interchanged.

Pins 1+, 1-

Pins 2+, 2-

LF Transducer A

LF Transducer B

Pins 3+, 3- : not used

Pins 4+, 4- HF Transducer

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents WideLine-10 Disclaimer QSC Audio Products 3-Year Limited WarrantyQSC is a registered trademark of QSC Audio Products, LLC Front grille removed IntroductionRear TRI AMP/BI AMP Switch MF Unshaded Select SwitchMF Unshaded Select Switch BI AMP Mode MF Unshaded Select Switch TRI AMP ModeNeutrik NL8FC Cable Connector Pinout Input Connector Wiring, BI AMP and TRI AMP ModesBI AMP Internal Shading PINNetwork Inserted Signal Path Input ConnectionsRigging Rules for SuspensionShock Loading WideLine-10 Working Load Limits and Design FactorsRear Link Angle Adjust Hardware Front Articulated Joint Knuckle HardwareAF2102-LA and WL Small Grid Adjusting the Angle Between Enclosures SplayAF2102-LA WL Small Grid AF2102-LADo not stack more than four 4 enclosures on a WL Small Grid Stacking the WL Small Grid DimensionsCare Specifications Mailing Address Telephone NumbersFacsimile Numbers World Wide Web Mail
Related manuals
Manual 14 pages 23.73 Kb

AF2102-LA, TD-000-227-00-C, WL Small Grid, WL2102-w specifications

The QSC Audio WL2102 is a sophisticated two-way line array loudspeaker designed for versatile sound reinforcement applications. With its innovative technologies and engineering, the WL2102 offers an impressive combination of power, clarity, and reliability, making it an ideal choice for both touring and permanent installations.

One of the standout features of the WL2102 is its advanced waveguide technology, which provides exceptional horizontal coverage and ensures consistent sound distribution across a wider listening area. This technology allows for precise phase coherence and minimizes inter-element interference, resulting in a clear and balanced audio experience for audiences of all sizes.

The WL2102 is equipped with dual 10-inch woofers that deliver powerful, deep bass response, paired with a high-frequency compression driver mounted on a newly designed waveguide. This configuration not only enhances the overall sound quality but also improves the speaker's efficiency. The result is a sonic performance that can easily cut through high ambient noise levels, making it perfect for outdoor events, concerts, and large venues.

Another notable aspect of the WL2102 is its lightweight and durable design. Constructed from high-quality materials, this speaker is built to withstand the rigors of touring while remaining easy to transport and set up. The cabinet features a unique rigging system that simplifies the alignment and deployment of multiple units in a flying array, ensuring optimal sight lines and coverage angles for audiences.

The WL2102 also incorporates QSC's proprietary "Amplified Networked" technology, allowing for seamless integration into modern audio systems. This feature enables users to monitor and manage multiple loudspeakers using QSC's software solutions, providing customizable control over performance parameters and system configurations.

With a frequency response range extending from 65 Hz to 20 kHz, the WL2102 is designed to deliver a full-spectrum audio experience, making it suitable for a wide variety of applications, including live music events, corporate functions, and theatrical performances.

In summary, the QSC Audio WL2102 stands out as a powerful, versatile loudspeaker that combines cutting-edge technology with user-friendly features. Its advanced design, exceptional sound quality, and robust build make it an excellent choice for sound professionals seeking reliability and performance in both touring and installation settings. Whether for large venues or outdoor events, the WL2102 is engineered to meet the demands of modern sound reinforcement.
Top Page Image Contents