Adjusting the Angle Between Enclosures Splay

Adjusting the Angle Between Enclosures (Splay)

The illustration shows the rear pin block of two enclosures joined by the upper enclosure’s rear link arm.

Use the first pin location (closest to the end) on the link arm for setting in normalized 2° increments. The left-side example shows two enclosures linked for 8° of splay. The ball-lock pin is inserted into the 8° position in the rear block while passing through the “normal” pin hole in the link.

When the “+3“ location is used, an additional 3° are added to the “normalized” location. The right side example shows two enclosures linked for 9° of splay. The ball-lock pin is inserted into the 6° position in the rear block while passing through the “+3°” pin hole in the link. The total splay is the 6° indicated on the block, plus the 3° additional from the link position, for a total of 9°. In this manner 1° increments can be attained starting with 3° (0° block location and +3° link arm location).

Rear link attached to achieve an 8° splay between enclosures.

Rear link attached to achieve a 9° splay between enclosures.

AF2102-LA and WL Small Grid

There are two array frames available for the WideLine-10 system.

The AF2102-LA is used for suspending larger arrays. The AF2102-LA may be inverted and used for ground stacking.

The WL Small Grid is a compact and easier to handle frame for use as a small array or stacking frame. This frame will easily sit on ground stacked bass enclosures or it can be used to suspend smaller arrays from the stage trusses.

AF2102-LA

Use only the QSC supplied 5/16" diameter x 1.25" long ball-lock pins or equivalents from a reputable source on front receiver tubes.

The three pick up rails allow for any number of rigging solutions to fit the most demanding venues. The rails are drilled for industry standard 5/8" shackles.

Do not stack more than eight (8) enclosures on the

AF2102-LA Frame.

Left pickup rail

Center pickup rail

Right pickup rail

Front

31.6"

(803 mm)

14.8"

(376 mm)

Bolt on receiver tube and 5/16" diameter, 1.25" long ball-lock pin.

37.0"

(940 mm)

AF2102-LA, TD-000-227-00-C, WL Small Grid, WL2102-w specifications

The QSC Audio WL2102 is a sophisticated two-way line array loudspeaker designed for versatile sound reinforcement applications. With its innovative technologies and engineering, the WL2102 offers an impressive combination of power, clarity, and reliability, making it an ideal choice for both touring and permanent installations.

One of the standout features of the WL2102 is its advanced waveguide technology, which provides exceptional horizontal coverage and ensures consistent sound distribution across a wider listening area. This technology allows for precise phase coherence and minimizes inter-element interference, resulting in a clear and balanced audio experience for audiences of all sizes.

The WL2102 is equipped with dual 10-inch woofers that deliver powerful, deep bass response, paired with a high-frequency compression driver mounted on a newly designed waveguide. This configuration not only enhances the overall sound quality but also improves the speaker's efficiency. The result is a sonic performance that can easily cut through high ambient noise levels, making it perfect for outdoor events, concerts, and large venues.

Another notable aspect of the WL2102 is its lightweight and durable design. Constructed from high-quality materials, this speaker is built to withstand the rigors of touring while remaining easy to transport and set up. The cabinet features a unique rigging system that simplifies the alignment and deployment of multiple units in a flying array, ensuring optimal sight lines and coverage angles for audiences.

The WL2102 also incorporates QSC's proprietary "Amplified Networked" technology, allowing for seamless integration into modern audio systems. This feature enables users to monitor and manage multiple loudspeakers using QSC's software solutions, providing customizable control over performance parameters and system configurations.

With a frequency response range extending from 65 Hz to 20 kHz, the WL2102 is designed to deliver a full-spectrum audio experience, making it suitable for a wide variety of applications, including live music events, corporate functions, and theatrical performances.

In summary, the QSC Audio WL2102 stands out as a powerful, versatile loudspeaker that combines cutting-edge technology with user-friendly features. Its advanced design, exceptional sound quality, and robust build make it an excellent choice for sound professionals seeking reliability and performance in both touring and installation settings. Whether for large venues or outdoor events, the WL2102 is engineered to meet the demands of modern sound reinforcement.