Whirlpool WSF26C2EXW, WSF26C2EXF, WSF26C2EXB Door Removal, Leveling and Alignment, Tools Needed

Door Removal, Leveling and Alignment

Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.

NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the refrigerator and freezer doors. If door removal is necessary, see the instructions below.

IMPORTANT: Before you begin, turn the refrigerator control OFF. Unplug refrigerator or disconnect power.

TOOLS NEEDED:

Phillips screwdriver, ³⁄₁₆" hex key, ¹⁄₄" hex-head socket wrench, ¹⁄₄" and ⁵⁄₁₆" open-ended wrenches or adjustable wrench, internal star drive or ³⁄₈" hex-head socket wrench

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

4	Top Left Hinge			5	Door Removal		6		Top Right Hinge
				A				A
	A									A
Do Not Remove Screws A								Do Not Remove Screws A
3	Wiring Connection
							7		Bottom Hinge
A	B	C D	E	F
	A. P-clamp						8		Leveling
	B. Routing Plate
	C. Electrical Housing
	D. Wiring Clip									A
	E. Grommets
	F. Wiring Plugs									B
2	Water Dispenser
	Tubing Connection							Raise		Lower
									C
									A. Bottom Hinge
									B. Leveler Bracket
									C. Leveling Foot
							9		Door Alignment
		A			1	Base Grille
								A	Raise
		A				Doors must be			Lower
	A. Face of Fitting							A. Alignment Screw
						open to 90˚
										3