Whirlpool ED26MK manual Removing the freezer shelves, Removing the freezer basket, Ice cube trays

Removing the freezer shelves...

Lilt the Front

Then the Back

I, Lift front slightly.

2.Lift back off supports.

3.Replace in reverse order.

Removing the freezer basket.. .

For proper arr movement, keep the freezer basket in place when the refrigerator is operating

To remove the basket: 1, Slide out to the stops.

2.Lift the front to clear the stops.

3.Slide out the rest of the way.

To replace the basket:

1, Place baskets on the slides.

2.Make sure the wire stops clear the front of the slides

3.Slide basket in.

Ice cube trays.. .

To remove ice:

1.Hold tray at both ends.

2.Slightly twist.

Changing the light bulbs.. .

Before removing the light shield for cleaning or for

replacing the bulb, unplug the refrigerator. Use

opplionce bulbs on/y

Pull Off the Dial;

Pull Out at the Bottom

If cubes are not used, they may shrink. The moving cold arr starts a slow evaporation. The longer cubes are stored, the smaller they get.

light blubs behind refrigemtor and freezer control consoles:

1.Pull control knob straight off.

2.Pull bottom of control panel straight out.

3.Lift top of panel off supports.

4.Replace with a 40-watt appliance bulb.

5.Replace panel in reverse order.

light bulb behind crisper and meat pan: 1, Remove crisper, meat pan and covers.

2.Bulb is on the back wall of refrigerator

3.Replace with a 40-watt appliance bulb.

4.Replace covers, meat pan and crisper.

Removing the base grille.. .

1, Open the doors.

2. Pull grille outwards as	shown	To	replace:
3. Do not remove Tech	sheet fastened behind grille	I,	Line	up grille support tabs with metal clips.
		2. Push firmly to snap Into place.
		3	Close	the doors.