Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number. (See page 27.)
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator Section is
TOO WARM
If Freezer
Section is
TOO WARM
If Refrigerator Section is
TOO COLD
If ICE isn’t
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
REASON:
Door opened often
Large amount of food added Room temperature too warm
Door opened often
Large amount of food added Very cold room temperature (can’t cycle often enough)
Controls not set correctly for your conditions
Heavy ice usage
Very cold room temperature (can’t cycle often enough)
Door opened often
Large amount of food added Very warm or very cold room temperatures
RECOMMENDED CONTROL SETTINGS:
Refrigerator 4
Freezer A
Refrigerator 3
Freezer C
Refrigerator 2
Freezer B
Refrigerator 3
Freezer C
Refrigerator 4
Freezer B
Removing the door shelf fronts
The door shelf fronts are removable for easier cleaning.
To remove shelf fronts:
1.Remove all items from the shelf.
2.Pull out on the inside tab at each end of the shelf front.
3.Pull shelf front straight out.
To replace shelf fronts:
I.Line up each end of the shelf front with the button on the door liner wall.
2.Push shelf front straight back until it snaps securely into place.
3.Replace items on the shelf.
8