Whirlpool W10321466A, ED5GVEXVD02 Accessories, Dispenser water is not cool enough on some models

Page 11

The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice clogged in the ice storage bin or delivery chute? Remove clogged ice, using a plastic utensil if necessary. Clean chute and bottom of storage bin using a warm moist cloth, and dry both thoroughly. To avoid clogging and maintain a fresh supply of ice, empty the storage bin and clean both the bin and delivery chute every two weeks.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements.”

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser for 2 to 3 seconds after releasing the dispenser lever/pad.

■New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough (on some models)

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order replacement filters, call 1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Standard Base Filter Cartridge:

Order Part #4396841 (T2RFWG2 and P2RFWG2)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Recommended Grounding Method LocationRequirementsElectrical Requirements Water Supply RequirementsStyle Connect Water SupplyReverse Osmosis Water Supply Style 1 Rotary Controls Style 2 Slide Controls Using theControlsAdjusting Controls Refrigerator USEWater and Ice Dispensers ConvertibleDrawer Temperature ControlCrisper Humidity Control Chilled Door BinRemember Ice Maker and Storage BinTo Dispense Ice Water Filtration System CleaningTo Clean Your Refrigerator Refrigerator CareRefrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water Temperature and MoistureTemperature is too warm Standard Base Filter Cartridge AccessoriesStainless Steel Cleaner and Polish Dispenser water is not cool enough on some modelsWater Filter Certifications Base Grille Water Filtration System Performance Data SheetsBase Grille Water Filtration System Base Grille Water Filtration System Base Grille Water Filtration System Disclaimer of Implied Warranties Limited WarrantyItems Excluded from Warranty This limited warranty does not coverRéfrigérateur Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions DinstallationExigences demplacement Déballagedu réfrigérateurAlimentation en eau par osmose inverse Méthode recommandée de mise à la terreSpécificationsélectriques Spécifications del’alimentationen eauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Ajustement des commandes Utilisation des commandesAchever l’installation Style 1 Commandes rotatives Style 2 Commandes à glissièreCONDITION/RAISON Ajustement Compartiment froid de la porteDistributeurs deauet de glaçons Distribution deauDistribution de glace Machineà glaçons et bac dentreposageUtilisation du distributeur sans filtre à eau Pour retirer et réinstaller le bac à glaçonsSystème defiltrationde leau Filtre à eau sans indicateur lumineux sur certains modèlesNettoyage de votre réfrigérateur Remplacement des ampoules d’éclairageEntretien DU Réfrigérateur NettoyageLe moteur semble fonctionner excessivement DépannageFonctionnement du réfrigérateur Le réfrigérateur ne fonctionne pasLe réfrigérateur bascule et n’est pas stable Température et humiditéGlaçons et eau Cartouche du filtre de la base standard AccessoiresNettoyant et poli pour acier inoxydable Système de filtration deau de la grille de la base Feuilles DE Données SUR LA PerformanceSystème de filtration deau de la grille de la base 909 mg/L Mg/L ± 10 % 05 mg/L 97,4 Particules classe 4200 #/mL 1900 #/mL 99,9 La présente garantie limitée ne couvre pas Garantie DE Gros Appareil Ménager Whirlpool CorporationGarantie Limitée Éléments Exclus DE LA GarantiePage W10321466A SP PN W10321467A

W10321466A, ED2VHEXVQ01, ED5FVGXWS07, ED5GVEXVD02 specifications

The Whirlpool ED5GVEXVD02, ED5FVGXWS07, ED2VHEXVQ01, and the W10321466A represent a range of modern refrigeration solutions, offering a variety of features and technologies to enhance the home kitchen experience. Each model combines functionality with contemporary design, aimed at optimizing storage space and maintaining food freshness.

The ED5GVEXVD02 boasts a generous capacity and offers feature-rich storage options, including adjustable shelves and humidity-controlled crisper drawers. This model includes the Adaptive Defrost feature, which monitors the compressor's performance to determine when defrosting is needed. This technology not only saves energy but also ensures that users can enjoy fresher food with less frost buildup.

Similarly, the ED5FVGXWS07 is designed with convenience and usability in mind. It features a water and ice dispenser on the door, providing instant access to chilled water and crushed or cubed ice. The Steel Interior offers robust durability, while the exterior is adorned with a fingerprint-resistant finish, maintaining a clean and polished look. This model also incorporates the Accu-Chill Temperature Management System, which uses built-in sensors to detect and adapt temperature, ensuring optimal cooling performance.

Meanwhile, the ED2VHEXVQ01 focuses on providing ample flexibility in storage, with a versatile shelving system and a dedicated dairy compartment, allowing users to organize their perishables effectively. This model is designed with an LED lighting system, providing clear visibility on each shelf, even in the back corners.

Lastly, the W10321466A enhances the user experience with its innovative design and smart capabilities. This model features a power outage assurance that maintains performance during trips, ensuring food stays fresh during power interruptions. The easy-to-clean spill-proof shelves and removable door bins are practical additions that cater to busy lifestyles.

All these models emphasize energy efficiency and employ advanced refrigeration technologies to ensure that food is stored at the optimal temperatures. The combination of these features and technologies makes Whirlpool refrigerators a reliable choice for consumers looking to upgrade their kitchen appliances with effective and stylish options that align with modern living.
Top Page Image Contents