Whirlpool EDl9VK Removing the crisper meat pan and covers, Adjusting the refrigerator shelves

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

Glass	shelves		are
heovy	Be	careful.		I	III1	I	)“I
Removing			freezer		shelves.. .
1. Lift front		slightly.
2. Lift back off supports.					99
3. Replace		in reverse		order.			I-
			Lltt	the Front
			Then the		Back	III	’

To remove glass shelves:

1.Tilt up at front.

2.Lift up at back.

3.Pull shelf straight out.

To replace:

1.Guide the rear hooks into the slots in the shelf supports.

2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.

Adjusting meat pan temperature.. .

Cold air flows against the meat pan through an opening between the freezer and the refrigerator This helps keep the meat pan colder than the rest of the refrigerator.

Set the control to let more or less cold air through.

Use Control to Adjust

Meat Pan Temperatures

Removing the crisper; meat pan and covers...

Removing:

1.Slide crisper and meat pan straight out to stop.

2.Lift the front.

3.Slide the rest of the way out.

4.Replace in reverse order

Removing covers:

l Covers are held in place by two pegs at the back and two notched tabs in front.

1.Press front tabs out of the way.

2.Lift cover front.

3.Lift back off the pegs.

4.Replace in reverse order

Removing freezer bin.. .

Fcr proper air movement. keep the freezer bin in place when the refrigerator is operating.

To remove the bln:

lSlide out to the stop.

lLift the front to clear the stop. l Slide out the rest of the way.

To replace the bln:

a Place bin on the slides.

l Make sure the stops clear the front of the slides.

l Slide bin in. 6