Using your refrigerator, Setting the controls

Using your refrigerator

Refrigerator	Control	Light Switch	Freezer Control
	Power Saving	Control

Setting the controls.. .

Controls for the refrigerator and freezer are In the refrigerator When the refrigerator IS plugged In for the first time.

1 Set the REFRIGERA- TOR CONTROL to 3

2 Set the FREEZER CONTROL to B

Give the refrigerator time to cool down com- pletely before adding food. (This may take sev- eral hours )

These settings should be about right for normal

household refrigerator usage.

The controls will be set about right when milk or juice IS as cold as you like and when ice cream IS firm.

Changing the control settings.. .

If you need to adjust temperatures In refrigerator or freezer, use the settings listed in the chart below

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments Then adjust the Freezer Control, if needed.

CONDITION:

If Refrigerator

Section is

TOO WARM

If Freezer

Section IS

TOO WARM

QUESTIONS?

ca” your 9 If Refrigerator sCeS)vcL~L’NE Section is

TOO COLD

	assistance	If ICE Isn’t
	telephone	If ICE Isn’t
	telephone	MADE FAST ENOUGH
	number	MADE FAST ENOUGH
	number
	@age 11).	If BOTH SECTIONS
		If BOTH SECTIONS
		are TOO WARM

								RECOMMENDED	CONTROL
REASONS:								SETTINGS:
Door	opened				often			Refrigerator	:
Large	amount				of food		added	Freezer	:
Room temperature						too	warm
Door	opened				often			Refrigerator	3
Large	amount				of food		added	Freezer	A
Very	cold		room temperature
[can’t	cycle			often		enough)
Controls not set correctly								Refrigerator
for your		condltlons						Freezer
Heavy		ice	usage					Refrigerator
Very	cold		room temperature					Freezer
[can’t	cycle			often		enough)
Dobr	opened				of ten			Refrigerator
Large	amount				of food		added	Freezer
Very warm 01very cold
room	temperatures

Power Saving Control.. .

The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from fuming on the outside of the refrigerator.

1Use the “CONSUMES LESSENERGY” setting when humidity ISlow.

2.Use the “REDUCES EXTERIOR MOISTURE” setting only if motsture forms on the outside of the refrigerator.