Changing the light bulb...
WARNING: Before removlng the light bulb, either unplugthe retrlgerator or disconnect
the electrlclty leading to the re- frlgerator at the main power supply. Shock and injury can occur if elec- tricity remains connected.
I, Reach behind control console to find bulb
2.Remove bulb.
3.Replace with a
Moving the meat pan and cover...
The meat pan and cover can be removed for cleanrng and moved to another shelf. If desrred Remove the meat pan first.
Removing:
1.Slide thepan out to stop
2.Lrft the front of meat pan
3 Slide pan the rest of the way out
4 Tilt cover up at front
5 Pull forward and out
Replacing:
1.Fit notches underneath cover over rear and center cross bars on shelf.
2.Lower cover in place.
3.Replace meat pan in reverse order
Adjusting the refrigerator shelves...
1Frrst. remove food from shelf
2.Slrde shelf strarght out to stop
3.Lift front.
4Slide the rest of the way out
Replacing Shelt:
1 Fit back of shelf on top of guides wrth wire stops on the bottom of gurdes
2 Lift front, slide shelf in untrl It clears guide stops
Removing crispers and crisper cover.. .
Removing the Crispers:
1 Slide crrsper straight out to stop, I~ftfront, then slide the rest of the way out.
2 Replace in the reverse order.
Removing Cover:
1 Lift front and remove the cover support
2 L~flout cover by pulling up and out.
Replacing | Cover: |
|
|
I. Fit back of cover into notch supports on walls of |
| ||
refrigerator, then lower front into place |
|
| |
2. Replace cover support with the long tab towards , |
| ||
the front | Note: If support needs adjustment. | turn | r’Lift |
|
|
| |
base right to lower, or left to raise
Removing and adjusting the freezer shelf...
To remove shelf:
1.Lift front slightly
2.Lift back off supports.
3.Replace in reverse order.
To adjust shelf:
1.Remove shelf.
2.Remove supports by sliding upwards.
3.Replace supports on desired level.
4.Replace shelf.
6
Shelf Guide
Pull out to stop. the Front and Pull Again.