Solving common ice maker problems
PR’OBLEM
Ice crescents attached at corners
Ice maker will not operate or ice is not made fast enough
POSSIBLE CAUSE/SOLUTION
l This is normal. They break apart easily. Shake bin occasion- ally to keep cubes SeDarated.
l ON/OFF lever is in the OFF (up) position. Lower lever to the ON (down) position.
l Freezer is not cold enough. Adjust temperature controls and wait 24 hours. (See “Changing the control settings” on
paw 9.)
l New plumbing connections can cause discolored or off- flavored ice. Discard the first few batches of ice.
l Cubes are stored too long. Throw them away and make a new supply.
l Foods in freezer are not wrapped properly. See “Food Storage Guide” on pages 19 and 20.
l Freezer and ice bin need to be cleaned. See pages 15 and 16.
Changing the light bulb
Electrical Shock Hazard
Unplug refrigerator before removing light bulb.
Failure to do so can result in death or electrlcal shock.
To change refrigerator light:
1.Unplug refrigerator.
2.Reach behind Control Panel to remove bulb.
3.Replace with a
4.Plug in refrigerator.
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.
13