QSC Audio 6.0 II CONNECTIONS- DataPort QSControl users only, What is a DataPort?, Connecting

Page 14

CONNECTIONS- DataPort (QSControl users only)

What is a DataPort?

The DataPort is a QSC-specific connection used for interfacing amplifiers, amplifier monitor- ing devices and signal processors. It is typically used in larger-sized installations where amplifiers may be located far away from system operators. The DataPort interconnects provide audio inputs to the amplifiers and amplifier operating data (temperatures, power status, audio power level, etc....) to other QSC equipment, such as the CM16a Amplifier

Network Monitor. Managing all this information and the operation of the amplifiers is QSC’s QSControl software running on a PC. QSControl primarily handles amplifier tasks, while another QSC program, Signal Manager, handles Processor configuration.

If you are not using the PL6.0 II with QSControl, QSC DSP-3, QSC DSP-4 or other QSC DataPort accessory, do not use the DataPort.

DataPort Cables

Use only QSC Audio DataPort Cables for DataPort connections. Molded-connector DataPort cables are standard. Premium DataPort cables (made to order with hand-wired termination) provide individually shielded audio pairs for the best possible audio performance. Either type of QSC DataPort cable is available from QSC’s Technical Services Group. Computer VGA cables are similar, but can degrade your audio quality; we do not recommend their use.

Connecting

Orient the DataPort cable’s male HD-15 plug with the DataPort receptacle, insert fully, and finger- tighten the retaining screws. Do not use tools to tighten the retaining screws!

If using the DataPort only for control and monitor- ing of amplifier functions and NOT audio input, then the audio input may be connected to the “normal” combo or terminal-block connectors. If audio inputs are active on both the DataPort and normal connections, they will be summed, producing unexpected results.

If connecting a QSC DSP-3 or DSP-4 module to the PL6.0 II, make sure the DataPort cable between the amp and the DSP module has pin #9 removed from either end. See DSP module documentation for details.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PowerLight 6.0 Important Safety Instructions Explanation of Symbols Do not OpenTable of Contents Remote Computer Control QSC PowerWave TechnologyINTRODUCTION- General Overview INTRODUCTION- Illustrations Front PanelUnpacking and Inspection SETUP- Rack MountingUnpacking Supporting the Front of the AmplifierSupporting the Rear of the Amplifier Attaching Rear Rack Ears MethodSETUP- Cooling Requirements Cooling Air Inlet and Exhaust VentsAC Power Connection Volt Models Nema L5-30 Receptacle SETUP- AC Power RequirementsAC Power Stereo Mode SETUP- Operating Mode SelectionOperating Mode Selection Connect the single input Parallel ModeBridge Mode Single speaker channelCONNECTIONS- Inputs Audio Input ConnectionsTRS 1/4-inch Terminal-block ConnectorsBalanced CONNECTIONS- DataPort QSControl users only What is a DataPort?Connecting Typical DataPort Application CONNECTIONS- Power Supply Control Standby/Enable Using the Rear Panel Power Supply Control ConnectorConnecting the Outputs to the Speakers CONNECTIONS- Outputs Binding PostsCONNECTIONS- Outputs Speakon pinout Speakon OutputsLED Indicators for Power Status USE- AC Power Switch and LED IndicatorsAC Power Switch USE- Gain Controls USE- Signal Level LED IndicatorsSignal Level LED Indicators Gain ControlsClip Limiting Tips USE- Clip LimitersClip Limiters Troubleshooting Amplifier won’t turn on when the Power switch is operatedTroubleshooting SPECIFICATIONS- PowerLight 6.0 II Electrical Data Output Power in wattsAppendix DataPort PinoutQSC PowerWave How does it work?Warranty Information & HOW to Contact QSC Disclaimer

6.0 II specifications

The QSC Audio 6.0 II is a powerful audio processing tool designed for professional sound systems, enhancing audio clarity and performance in a variety of settings. This processor offers an impressive combination of advanced features that cater to both live sound and installed sound applications. Its robust architecture allows for seamless integration into any audio setup, making it a preferred choice for audio engineers and sound technicians alike.

One of the standout features of the QSC Audio 6.0 II is its six-channel architecture, allowing for comprehensive control over multiple audio sources. Each channel is equipped with dedicated signal processing capabilities, including advanced equalization, dynamics processing, and delay adjustments. This ensures that sound can be customized to meet the specific needs of any environment, whether it's a concert venue, corporate event, or a house of worship.

The audio processor utilizes QSC’s proprietary Acoustic Intelligence™ technology, which analyzes the acoustic environment in real-time and adapts the audio output accordingly. This ensures optimal sound quality, regardless of the venue's unique characteristics. The technology is complemented by QSC's sophisticated FIR (Finite Impulse Response) filtering, which provides superior phase coherence and transient response.

Another key feature of the QSC Audio 6.0 II is its intuitive user interface, which allows for easy navigation and setup. The processor can be controlled remotely via a web browser or dedicated application, making adjustments smooth and efficient. The built-in scheduling feature allows users to set specific audio profiles for different times of the day or events, further enhancing workflow.

For connectivity, the QSC Audio 6.0 II includes multiple options, such as balanced XLR inputs and outputs, which ensure secure and high-quality signal transmission. It also supports digital audio protocols, making it versatile for various applications. The processor is designed with expandability in mind, allowing it to work seamlessly with additional QSC products and other third-party equipment.

In conclusion, the QSC Audio 6.0 II stands out as a premier audio processing solution, combining advanced technology with user-friendly features. It provides unparalleled sound quality and reliability, making it an essential tool for professionals in the audio industry. Whether in live sound applications or permanent installations, the QSC Audio 6.0 II proves to be a valuable asset for achieving exceptional audio performance.
Top Page Image Contents