QSC Audio 6.0 II CONNECTIONS- Outputs Binding Posts, Connecting the Outputs to the Speakers

Page 17

CONNECTIONS- Outputs: Binding Posts

Connecting the Outputs to the Speakers

Use either the binding post or the Speakon™ output connections. Binding posts are covered on this page, Speakons on the following page. Note that the PL6.0 II does not support Bridge mode output from the Speakons (see page 11).

There are two basic speaker connection configurations for the PL6.0 II. Stereo and Parallel operating modes use two separate output channel connections. Bridge mode uses only one output channel connection.

Refer to the chart below for connection diagrams. Mode Switch position is shown for reference. Speakon™ pinout is provided on the following page.

Do not use less than 4-ohm loads in Bridge mode! Note polarity of connections for Bridge mode. Speakon connections do not support Bridge mode.

Do not use banana-type plugs for connecting to binding posts. They will fail at the high power levels of this amplifier!

Image 17

Contents PowerLight 6.0 Do not Open Important Safety Instructions Explanation of SymbolsTable of Contents Remote Computer Control QSC PowerWave TechnologyINTRODUCTION- General Overview Front Panel INTRODUCTION- IllustrationsUnpacking SETUP- Rack MountingUnpacking and Inspection Supporting the Front of the AmplifierAttaching Rear Rack Ears Method Supporting the Rear of the AmplifierCooling Air Inlet and Exhaust Vents SETUP- Cooling RequirementsAC Power Connection Volt Models Nema L5-30 Receptacle SETUP- AC Power RequirementsAC Power Stereo Mode SETUP- Operating Mode SelectionOperating Mode Selection Bridge Mode Parallel ModeConnect the single input Single speaker channelAudio Input Connections CONNECTIONS- InputsTRS 1/4-inch Terminal-block ConnectorsBalanced CONNECTIONS- DataPort QSControl users only What is a DataPort?Connecting Typical DataPort Application Using the Rear Panel Power Supply Control Connector CONNECTIONS- Power Supply Control Standby/EnableCONNECTIONS- Outputs Binding Posts Connecting the Outputs to the SpeakersSpeakon Outputs CONNECTIONS- Outputs Speakon pinoutLED Indicators for Power Status USE- AC Power Switch and LED IndicatorsAC Power Switch Signal Level LED Indicators USE- Signal Level LED IndicatorsUSE- Gain Controls Gain ControlsClip Limiting Tips USE- Clip LimitersClip Limiters Amplifier won’t turn on when the Power switch is operated TroubleshootingTroubleshooting Output Power in watts SPECIFICATIONS- PowerLight 6.0 II Electrical DataDataPort Pinout AppendixHow does it work? QSC PowerWaveDisclaimer Warranty Information & HOW to Contact QSC

6.0 II specifications

The QSC Audio 6.0 II is a powerful audio processing tool designed for professional sound systems, enhancing audio clarity and performance in a variety of settings. This processor offers an impressive combination of advanced features that cater to both live sound and installed sound applications. Its robust architecture allows for seamless integration into any audio setup, making it a preferred choice for audio engineers and sound technicians alike.

One of the standout features of the QSC Audio 6.0 II is its six-channel architecture, allowing for comprehensive control over multiple audio sources. Each channel is equipped with dedicated signal processing capabilities, including advanced equalization, dynamics processing, and delay adjustments. This ensures that sound can be customized to meet the specific needs of any environment, whether it's a concert venue, corporate event, or a house of worship.

The audio processor utilizes QSC’s proprietary Acoustic Intelligence™ technology, which analyzes the acoustic environment in real-time and adapts the audio output accordingly. This ensures optimal sound quality, regardless of the venue's unique characteristics. The technology is complemented by QSC's sophisticated FIR (Finite Impulse Response) filtering, which provides superior phase coherence and transient response.

Another key feature of the QSC Audio 6.0 II is its intuitive user interface, which allows for easy navigation and setup. The processor can be controlled remotely via a web browser or dedicated application, making adjustments smooth and efficient. The built-in scheduling feature allows users to set specific audio profiles for different times of the day or events, further enhancing workflow.

For connectivity, the QSC Audio 6.0 II includes multiple options, such as balanced XLR inputs and outputs, which ensure secure and high-quality signal transmission. It also supports digital audio protocols, making it versatile for various applications. The processor is designed with expandability in mind, allowing it to work seamlessly with additional QSC products and other third-party equipment.

In conclusion, the QSC Audio 6.0 II stands out as a premier audio processing solution, combining advanced technology with user-friendly features. It provides unparalleled sound quality and reliability, making it an essential tool for professionals in the audio industry. Whether in live sound applications or permanent installations, the QSC Audio 6.0 II proves to be a valuable asset for achieving exceptional audio performance.