Whirlpool ET16AK manual Change the Light Bulb, Adjust the Refrigerator Shelves

Adjust The Refrigerator Shelves (Figure 10)

Using Your Refrigerator (Con/nued...)

CHANGE THE LIGHT BULB...

Electrical Shock Hazard. Electricity can	Change The Light Bulb (Figure 9)
cause death or serious injury. Always
make sure wall receptacle and plug are
grounded prior to plugging in refrigerator.

To change your refrigerator light bulb, do the following:

1.Reach behind Control Console to find bulb.

2.Unscrew bulb.

3.Screw a 40-watt appliance bulb in to socket (See Figure 9).

ADJUST THE REFRIGERATOR SHELVES...

To adjust the shelving, do the following:
1.	First, remove the food from shelf.	Guide Stop
2.	Slide shelf straight out to stop.
		Shelf Stop
3.	Lift front (See Figure 10).
4.	Slide the rest of the way out.

To replace the shelving, do the following:

1. Fit back of shelf on top of guides with wire stops on the bottom of guides.

2. Lift front, slide shelf in until it clears guide stops.

REMOVE AND ADJUST THE FREEZER SHELF...

Shelf guide

To remove the shelf, do the following: 1. Lift front slightly.

2. Lift back off supports.

3. Replace in reverse order.

To adjust the shelf, do the following: 1. Remove food from shelf.

2. Remove shelf

3. Remove supports by sliding upwards (See Figure 11).

4. Replace supports on desired level.

5. Replace shelf.

Remove And Adjust The Freezer Shelf (Figure 11)

Shelf Support

8 Whirlpool Use and Care Guide–No-Frost Refrigerator-Freezer–Model ET16AK