UsingYourRefrigerator
Setting the controls
Controls for the refrigerator and freezer are in the refrigerator. To adjust a control, turn knob. When the refrigerator is plugged in for the first time:
1. Set the refrigerator Control to 3.
2. Set the Freezer Control to B.
Give the refrigerator time to cool down com- pletely before adding food. (This may take several hours.)
These settings shouk! be right for normal household refrigerator usage.
The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.
Changlng the control settings
lt you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart bebw as a guide. If you have questions, call our Consumer Assistance Center number. (See
paw 14.1
l Adjust the Refrigerator Control first.
l Waft at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
CONDITION:
lf Refrigerator Section is
TOO WARM
fl Freezer Section is
TOO WARM
ffRefrigerator Section is
TOO COLD
If ICE isn’t
MADE FAST ENOUGH
if BOTH SECTlONS
are TOO WARM
REASON: | RECOMMENDED |
|
CONTROL SElllNGS: | ||
Door opened often | Refrigerator |
|
Large amount of fwd added | Freezer | : |
Room temperature too warm |
|
|
Door opened often | Refrigerator | i |
Large amount of food added | Freezer | |
Very oztld room temperature |
|
|
(can’t cycle often enough) |
|
|
Controls not set conectly | Refrigerator | i |
for your conditions | Freezer | |
Heavy ice usage | Refrigerator |
|
Very cold room temperature | Freezer | ii |
(can’t cyde often enough) |
|
|
Door opened often | Refrigerator | 4 |
Large amount of food added | Freezer | B |
Very warm or very cold room |
|
|
temperatures |
|
|
5